UEM KT RD
Union nut for conical nozzlesProduct image
Properties
Application |
in construction, mining and tunnel building |
Connection 1 |
Rund nut thread |
Standard |
DIN 8537 / 20 033 |
Temp. min. |
-40 °C |
Temp. max. |
95 °C |
Media |
Compressed air, water |
Material |
Malleable cast iron |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | G1 | Length (mm) |
b (mm) |
Hole Ø (mm) |
Operating pressure |
---|---|---|---|---|---|
UEM RD 32 | Rd 32 x 1/8" | 28 | 65 | 23,0 | PN 25 |
UEM RD 32-2 | Rd 32 x 1/8" | 28 | 65 | 27,5 | PN 25 |
UEM RD 38 | Rd 38 x 1/8" | 33 | 76 | 29,0 | PN 25 |
UEM RD 46 | Rd 46 x 1/6" | 36 | 86 | 35,0 | PN 25 |
UEM RD 55 | Rd 55 x 1/6" | 38 | 95 | 42,0 | PN 25 |
UEM RD 62 | Rd 62 x 1/6" | 44 | 105 | 49,0 | PN 25 |
UEM RD 75 | Rd 75 x 1/6" | 50 | 137 | 61,0 | PN 25 |
UEM RD 105 | Rd 105 x 1/4" | 60 | 158 | - | PN 25 |
G1 = Thread of connection 1
Accessory for following products
- KT MM
- Conical nozzle
Spare part for following products
- KT UEM RD
- Conical nozzle with union nut
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.