W45 HRK IR
Screw-in socket, angle 45°Product image
Properties
Connection 1 |
BSPT conical external threads |
Sealing form 1 |
thread seal |
Connection 2 |
BSP cylindrical internal threads |
Sealing form 2 |
Flat seal |
Design |
Screw-in sockets |
Construction |
Angle 45° |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | G1 | G2 | AF (mm) |
---|---|---|---|
W45 HRK 02 IR | R 1/8" K | G 1/8" -28 | 14 |
W45 HRK 04 IR | R 1/4" K | G 1/4" -19 | 19 |
W45 HRK 06 IR | R 3/8" K | G 3/8" -19 | 22 |
W45 HRK 08 IR | R 1/2" K | G 1/2" -14 | 27 |
W45 HRK 12 IR | R 3/4" K | G 3/4" -14 | 32 |
W45 HRK 16 IR | R 1" K | G 1" -11 | 41 |
AF = Width across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.