Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
WB45 AOL HL
Connection socket, angle 45°
Product image
Properties
| Connection 1 |
metric nut thread |
| Sealing form 1 |
24° outer cone with O-ring |
| Connection 2 |
metric cylindrical outer thread |
| Sealing form 2 |
24° inner cone |
| Design |
Connecting socket (short pipe bend) |
| Construction |
Angle 45° |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | External pipe Ø (mm) |
Calculation pressure (bar) |
G1 + G2 | S1 | S2 | OR |
|---|---|---|---|---|---|---|---|
| WB45 AOL 04 HL | L | 6 | 315 | M 12 x 1.5 | 14 | 12 | 4.0 x 1.5 |
| WB45 AOL 06 HL | L | 8 | 315 | M 14 x 1.5 | 17 | 14 | 6.0 x 1.5 |
| WB45 AOL 08 HL | L | 10 | 315 | M 16 x 1.5 | 19 | 17 | 7.5 x 1.5 |
| WB45 AOL 10 HL | L | 12 | 315 | M 18 x 1.5 | 22 | 19 | 9.0 x 1.5 |
| WB45 AOL 13 HL | L | 15 | 315 | M 22 x 1.5 | 27 | 22 | 12.0 x 2.0 |
| WB45 AOL 16 HL | L | 18 | 315 | M 26 x 1.5 | 32 | 27 | 15.0 x 2.0 |
| WB45 AOL 20 HL | L | 22 | 160 | M 30 x 2 | 36 | 30 | 20.0 x 2.0 |
| WB45 AOL 25 HL | L | 28 | 160 | M 36 x 2 | 41 | 36 | 26.0 x 2.0 |
| WB45 AOL 32 HL | L | 35 | 160 | M 45 x 2 | 50 | 46 | 32.0 x 2.5 |
| WB45 AOL 40 HL | L | 42 | 160 | M 52 x 2 | 60 | 55 | 38.0 x 2.5 |
Series: LL = Very light L = Light S = Heavy – SW, S1, S2 = With across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.