Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
WB90 AOS HS
Connection socket, angle 90°
Product image
Properties
| Connection 1 |
metric nut thread |
| Sealing form 1 |
24° outer cone with O-ring |
| Connection 2 |
metric cylindrical outer thread |
| Sealing form 2 |
24° inner cone |
| Design |
Connecting socket (short pipe bend) |
| Construction |
Angle 90° |
| Material |
Steel |
| Surface |
electro galvanised |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
 Identification |
Series | External pipe Ø (mm) |
Calculation pressure (bar) |
G1 + G2 | S1 | S2 | OR |
|---|---|---|---|---|---|---|---|
| WB90 AOS 03 HS | S | 6 | 600 | M 14 x 1.5 | 17 | 14 | 4.0 x 1.5 |
| WB90 AOS 04 HS | S | 8 | 600 | M 16 x 1.5 | 19 | 17 | 6.0 x 1.5 |
| WB90 AOS 06 HS | S | 10 | 600 | M 18 x 1.5 | 22 | 19 | 7.5 x 1.5 |
| WB90 AOS 08 HS | S | 12 | 600 | M 20 x 1.5 | 24 | 22 | 9.0 x 1.5 |
| WB90 AOS 10 HS | S | 14 | 600 | M 22 x 1.5 | 27 | 22 | 10.0 x 2.0 |
| WB90 AOS 13 HS | S | 16 | 400 | M 24 x 1.5 | 30 | 24 | 12.0 x 2.0 |
| WB90 AOS 16 HS | S | 20 | 400 | M 30 x 2 | 36 | 30 | 16.3 x 2.4 |
| WB90 AOS 20 HS | S | 25 | 400 | M 36 x 2 | 46 | 36 | 20.3 x 2.4 |
| WB90 AOS 25 HS | S | 30 | 400 | M 42 x 2 | 50 | 46 | 25.3 x 2.4 |
| WB90 AOS 32 HS | S | 38 | 360 | M 52 x 2 | 60 | 55 | 33.3 x 2.4 |
Series: LL = Very light L = Light S = Heavy – SW, S1, S2 = With across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.