Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
WRM-PI
Wiper WRM-PI
Product image
Properties
| Design |
Wipers |
| Sliding speed max. |
0,8 m/s |
| Temp. min. |
-30 °C |
| Temp. max. |
80 °C |
| Media |
Mineral oils |
| Installation |
bend the wiper into a kidney shape and press into the locating groove |
| Design |
Inches |
| Material |
PUR |
| Application |
Hydraulics |
Description
Easy assembly.
Simple solution.
High abrasion resistance.
Item
Sort upwards
Sort downwards
 Identification |
d (mm) |
D (mm) |
L (mm) |
C (mm) |
|---|---|---|---|---|
| WRM-PI 050 075 | 12,70 | 19,06 | 3,2 | 16,76 |
| WRM-PI 075 112 | 28,57 | 28,57 | 4,8 | 24,88 |
| WRM-PI 087 125 | 22,22 | 31,75 | 4,8 | 28,45 |
| WRM-PI 100 137 | 25,40 | 34,92 | 4,8 | 31,62 |
| WRM-PI 112 150 | 28,57 | 38,10 | 4,8 | 34,80 |
| WRM-PI 125 162 | 31,75 | 41,27 | 4,8 | 37,97 |
| WRM-PI 137 175 | 34,92 | 44,45 | 4,8 | 41,14 |
| WRM-PI 150 187 | 38,10 | 47,62 | 4,8 | 44,32 |
| WRM-PI 162 200 | 41,27 | 50,80 | 4,8 | 47,50 |
| WRM-PI 175 212 | 44,45 | 53,97 | 4,8 | 50,67 |
| WRM-PI 200 250 | 50,80 | 63,50 | 6,4 | 59,18 |
| WRM-PI 225 275 | 57,15 | 69,85 | 6,4 | 65,46 |
| WRM-PI 250 300 | 63,50 | 76,20 | 6,4 | 71,81 |
| WRM-PI 262 312 | 66,67 | 79,37 | 6,4 | 74,98 |
| WRM-PI 300 350 | 76,20 | 88,90 | 6,4 | 84,51 |
| WRM-PI 350 400 | 88,90 | 101,60 | 6,4 | 97,20 |
| WRM-PI 450 500 | 114,30 | 127,00 | 6,4 | 122,61 |
Ordering information
We are able to produce wipers with diameters of 20 to 510 mm with short lead times.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.