XTMK VA
Screw-in fitting, T shapedProduct image
Properties
Connection 1 |
metric conical outer thread |
Sealing form 1 |
thread seal |
Connection 2 + 3 |
metric cylindrical outer thread |
Sealing form 2 + 3 |
24° inner cone |
Design |
Screw-in fitting |
Construction |
T shaped |
Standard |
DIN 3906 |
Scope of supply |
Socket (without union nut and cutting ring) |
Material |
Stainless steel |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
Identification | Series | Operating pressure | Ø d2 (mm) |
G | i (mm) |
L4 (mm) |
L5 (mm) |
L7 (mm) |
AF (mm) |
---|---|---|---|---|---|---|---|---|---|
XTM 04 LL VA | LL | PN 100 | 4 | M 8 x 1 K | 8 | 11,0 | 17 | 15 | 9 |
XTM 04 LL 6 VA | LL | PN 100 | 4 | M 6 x 1 K | 8 | 11,0 | 17 | 15 | 9 |
XTM 06 LL VA | LL | PN 100 | 6 | M 10 x 1 K | 8 | 9,5 | 17 | 15 | 9 |
XTM 06 LL 6 VA | LL | PN 100 | 6 | M 6 x 1 K | 8 | 9,5 | 17 | 15 | 9 |
XTM 06 LL 8 VA | LL | PN 100 | 6 | M 8 x 1 K | 8 | 9,5 | 17 | 15 | 9 |
XTM 06 LL 10 VA | LL | PN 100 | 6 | M 10 x 1 K | 8 | 9,5 | 17 | 15 | 9 |
XTM 08 LL VA | LL | PN 100 | 8 | M 10 x 1 K | 8 | 11,5 | 20 | 17 | 12 |
XTM NW 04 HL VA | L | PN 315 | 6 | M 10 x 1 K | 8 | 12,0 | 20 | 19 | 12 |
XTM NW 06 HL VA | L | PN 315 | 8 | M 12 x 1.5 K | 12 | 14,0 | 26 | 21 | 12 |
XTM NW 08 HL VA | L | PN 315 | 10 | M 14 x 1.5 K | 12 | 15,0 | 27 | 22 | 14 |
XTM NW 10 HL VA | L | PN 315 | 12 | M 16 x 1.5 K | 12 | 17,0 | 28 | 24 | 17 |
XTM NW 13 HL VA | L | PN 315 | 15 | M 18 x 1.5 K | 12 | 21,0 | 32 | 28 | 19 |
XTM NW 16 HL VA | L | PN 315 | 18 | M 22 x 1.5 K | 14 | 23,5 | 34 | 31 | 24 |
XTM NW 03 HS VA | S | PN 400 | 6 | M 12 x 1.5 K | 12 | 16,0 | 26 | 23 | 12 |
XTM NW 04 HS VA | S | PN 400 | 8 | M 14 x 1.5 K | 12 | 17,0 | 26 | 24 | 14 |
XTM NW 06 HS VA | S | PN 400 | 10 | M 16 x 1.5 K | 12 | 17,5 | 27 | 25 | 17 |
XTM NW 08 HS VA | S | PN 400 | 12 | M 18 x 1.5 K | 12 | 21,5 | 28 | 29 | 19 |
XTM NW 10 HS VA | S | PN 400 | 14 | M 20 x 1.5 K | 14 | 22,0 | 32 | 30 | 19 |
XTM NW 13 HS VA | S | PN 400 | 16 | M 22 x 1.5 K | 14 | 24,5 | 32 | 33 | 24 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø = External pipe diameter
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.