K-LKM S NW7,6 AG
Safety couplings DN 7.6, maleSlika proizvoda
Karakteristike
Radni tlak |
Max. 16 bar |
Protok zraka |
2.250 l/min (at 6 bar and Δp = 0.5 bar) |
Temperatura medija |
-20 °C to +100 °C |
Materijal |
Galvanised steel / brass |
Opruga |
Stainless-steel |
Brtveni materijal |
NBR |
Opis
High-quality, robust and durable, one-hand quick disconnect safety couplings, with very high flow rates and only a small pressure drop.The coupling is released fully automatically in two steps. Air is relieved from the coupling before it is completely disconnected, to minimise the risk of injury to the operator from hose ends flying around. The plug is only disconnected from the coupling if the residual pressure has dropped below 0.3 bar. The dreaded "whiplash effect" is thus avoided and the risk of injury virtually eliminated. This safety version conforms to ISO-Standard DIN EN ISO 4414.
Napomena
Drugi podatci na zahtjev.
Artikl
poredati uzlazno
poredati silazno
Naziv | Priključak | Duljina (mm) |
SW (mm) |
---|---|---|---|
K- 07 35 13 19 | R 1/4 male | 63,0 | 20 |
K- 07 35 13 21 | R 3/8 male | 61,0 | 20 |
K- 07 35 13 16 | R 1/2 male | 55,5 | 22 |
Dodatni elementi
- K-NIPPEL KUPPL NW7 AG VZ PTFE
- Plugs for couplings DN 7.2 - DN 7.8, hardened and galvanised steel, male threaded, FPM (PTFE coated) seal
- K-NIPPEL KUPPL NW7 IG VZ 1
- Plugs for couplings DN 7.2 - DN 7.8, hardened and galvanised steel, female
- K-NIPPEL KUPPL STREAM LINE
- Plugs for couplings DN 7.2 - DN 7.8, hardened and galvanised steel »stream line«
- K-TUE 7,2 7,8 ST VZ 2
- Stems for couplings DN 7.2 - DN 7.8, hardened and galvanised steel
Isključenje jamstva
Usprkos pažljivoj provjeri ne mogu se isključiti pogreške i zbog toga ne preuzimamo odgovornost za sadržane podatke.
Svi podaci u našem online katalogu temelje se na trenutno važećim normama i propisima strukovne zadruge. Poštivanje naših propisa montaže jamče Vam sigurnost proizvoda. Nepoštivanje svih navedenih propisa može ugroziti sigurnost rada proizvoda i dovesti do gubitka jamstva. Naše jamstvo vrijedi u svakom slučaju samo za HANSA-FLEX proizvode. Naši proizvodi se stalno dalje razvijaju i zbog toga su moguće tehničke promjene.