K-LKM S NW7,6 AG
Safety couplings DN 7.6, maleSlika proizvoda
Osobine
Radni pritisak |
Max. 16 bar |
Protok vazduha |
2.250 l/min (at 6 bar and Δp = 0.5 bar) |
Temperatura medija |
-20 °C to +100 °C |
Materijal |
Galvanised steel / brass |
Opruga |
Stainless-steel |
Zaptivni materijal |
NBR |
Opis
High-quality, robust and durable, one-hand quick disconnect safety couplings, with very high flow rates and only a small pressure drop.The coupling is released fully automatically in two steps. Air is relieved from the coupling before it is completely disconnected, to minimise the risk of injury to the operator from hose ends flying around. The plug is only disconnected from the coupling if the residual pressure has dropped below 0.3 bar. The dreaded "whiplash effect" is thus avoided and the risk of injury virtually eliminated. This safety version conforms to ISO-Standard DIN EN ISO 4414.
Napomena
Ostali podaci na upit.
Artikal
sortiranje nagore
sortiranje nadole
Naziv | Priključak | Dužina (mm) |
SW (mm) |
---|---|---|---|
K- 07 35 13 19 | R 1/4 male | 63,0 | 20 |
K- 07 35 13 21 | R 3/8 male | 61,0 | 20 |
K- 07 35 13 16 | R 1/2 male | 55,5 | 22 |
Dodatni elementi
- K-NIPPEL KUPPL NW7 AG VZ PTFE
- Plugs for couplings DN 7.2 - DN 7.8, hardened and galvanised steel, male threaded, FPM (PTFE coated) seal
- K-NIPPEL KUPPL NW7 IG VZ 1
- Plugs for couplings DN 7.2 - DN 7.8, hardened and galvanised steel, female
- K-NIPPEL KUPPL STREAM LINE
- Plugs for couplings DN 7.2 - DN 7.8, hardened and galvanised steel »stream line«
- K-TUE 7,2 7,8 ST VZ 2
- Stems for couplings DN 7.2 - DN 7.8, hardened and galvanised steel
Isključenje od odgovornosti
Uprkos pažljivom proveravanju, ne možemo isključiti greške i ne preuzimamo nikakvu garanciju za navedene podatke.
Svi podatci u našem onlajn katalogu počivaju na trenutno važećim normama i propisa od strane stručnih udruženja. Samo pridržavanje naših propisa uvezi montaže Vam garantuje sigurnost proizvoda. Ne pridržavanje svih navedenih propisa može negativno uticati na funkcionalnu sigurnost proizvoda i do gubitka prava na garanciju. Naša garancija au svakom slučaju važi sa proizvode firme HANSA-FLEX. Naši proizvodi se stalno dalje razvijaju, te zadržavamo prava na tehničke izmene.