Odabrati jezik
Bugarski (Български)
Engleski (English)
Estonski (Eesti)
Francuski (Français)
Kineski (汉语)
Latvijski (Latviešu)
Litavski (Lietuvių k.)
Mađarski (Magyar)
Nizozemski (Nederlands)
Njemački (Deutsch)
Poljski (Polski)
Portugalski (Português)
Rumunjski (Română)
Ruski (Русский)
Slovački (Slovenčina)
Slovenski (Slovenščina)
Srpski (Српска)
Talijanski (Italiano)
Turski (Türkçe)
Češki (Čeština)
Španjolski (Español)
K-KONSTANT DRUCKREGLER STANDARD 2
Constant-pressure regulators
Slika proizvoda
Karakteristike
| Ulazni tlak |
Max. 25 bar (G 1/4 to G 1/2), Max. 40 bar (G 3/4 to G 1 1/2) |
| Temperatura medija |
max. 60 °C |
| Okolna temperatura |
Max. 90 °C |
| Brtveni materijal |
NBR |
| Kućište |
Die-cast zinc for (G 1/4 to G 1/2), for Brass (G 3/4 to G 1 1/2) |
| Mjerenje vrijednosti protoka |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
| Drugi podatci |
User manual on request |
Opis
Reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design. The pressure regulators maintain a constant working pressure regardless of variations in the inlet pressure.
Artikl
poredati uzlazno
poredati silazno
 Naziv |
Navoj | Regulacijsko područje | Protok (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN |
|---|---|---|---|---|---|---|---|---|
| K- 07 25 03 98 | G 3/4 | 0.5 - 3 bar | 8700 | 116,0 | 93,0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 03 99 | G 3/4 | 0.5 - 6 bar | 8200 | 116,0 | 93,0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 04 00 | G 3/4 | 0.5 - 10 bar | 7830 | 116,0 | 93,0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 04 01 | G 3/4 | 0.5 - 16 bar | 7400 | 116,0 | 93,0 mm | 43,0 | 172,0 | 20 |
| K- 07 25 04 02 | G 3/4 | 0.5 - 25 bar | 6500 | 116,0 | 93,0 mm | 43,0 | 172,0 | 20 |
| K- 07 25 04 03 | G 1 | 0.5 - 3 bar | 8700 | 116,0 | 81,0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 04 04 | G 1 | 0.5 - 6 bar | 8200 | 116,0 | 81,0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 04 05 | G 1 | 0.5 - 10 bar | 7830 | 116,0 | 81,0 mm | 43,0 | 177,0 | 20 |
| K- 07 25 04 06 | G 1 | 0.5 - 16 bar | 7400 | 116,0 | 81,0 mm | 43,0 | 172,0 | 20 |
| K- 07 25 04 07 | G 1 | 0.5 - 25 bar | 6500 | 116,0 | 81,0 mm | 43,0 | 172,0 | 20 |
| K- 07 25 04 08 | G 1 1/4 | 0.5 - 3 bar | 16000 | 114,0 | 126,0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 09 | G 1 1/4 | 0.5 - 6 bar | 14000 | 114,0 | 126,0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 10 | G 1 1/4 | 0.5 - 10 bar | 12160 | 114,0 | 126,0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 11 | G 1 1/4 | 0.5 - 16 bar | 11000 | 114,0 | 126,0 mm | 48,0 | 184,0 | 25 |
| K- 07 25 04 12 | G 1 1/4 | 0.5 - 25 bar | 8500 | 114,0 | 126,0 mm | 48,0 | 184,0 | 25 |
| K- 07 25 04 13 | G 1 1/2 | 0.5 - 3 bar | 16000 | 114,0 | 114,0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 14 | G 1 1/2 | 0.5 - 6 bar | 14000 | 114,0 | 114,0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 15 | G 1 1/2 | 0.5 - 10 bar | 12160 | 114,0 | 114,0 mm | 48,0 | 189,0 | 25 |
| K- 07 25 04 16 | G 1 1/2 | 0.5 - 16 bar | 11000 | 114,0 | 114,0 mm | 48,0 | 184,0 | 25 |
| K- 07 25 04 17 | G 1 1/2 | 0.5 - 25 bar | 8500 | 114,0 | 114,0 mm | 48,0 | 184,0 | 25 |
Rezervni dijelovi
- K-HALTERBAUSATZ STANDARD
- Holder
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-RD NIPPEL KURZ 1
- Reducing nipples, short type
- K-XV AGM 2
- Double nipples, parallel male thread
Isključenje jamstva
Usprkos pažljivoj provjeri ne mogu se isključiti pogreške i zbog toga ne preuzimamo odgovornost za sadržane podatke.
Svi podaci u našem online katalogu temelje se na trenutno važećim normama i propisima strukovne zadruge. Poštivanje naših propisa montaže jamče Vam sigurnost proizvoda. Nepoštivanje svih navedenih propisa može ugroziti sigurnost rada proizvoda i dovesti do gubitka jamstva. Naše jamstvo vrijedi u svakom slučaju samo za HANSA-FLEX proizvode. Naši proizvodi se stalno dalje razvijaju i zbog toga su moguće tehničke promjene.