Odabrati jezik
Bugarski (Български)
Engleski (English)
Estonski (Eesti)
Francuski (Français)
Holandski (Nederlands)
Hrvatski (Hrvatski)
Italijanski (Italiano)
Kineski (汉语)
Letonski (Latviešu)
Litvanski (Lietuvių k.)
Mađarski (Magyar)
Nemački (Deutsch)
Poljski (Polski)
Portugalski (Português)
Rumunski (Română)
Ruski (Русский)
Slovački (Slovenčina)
Slovenski (Slovenščina)
Turski (Türkçe)
Češki (Čeština)
Španski (Español)
K-DRUCKVERST VBA
Booster Regulator, VBA
Slika proizvoda
Osobine
| maks. radni pritisak |
0.20 MPa |
| Pneumatski priključak manometra |
Rc 1/8 |
| Broj priključaka pneumatsko manometra |
2 |
| maks. ulazni pritisak |
0,1 to 1,0 MPa |
| Temperatura medija |
+2 °C to +50 °C |
| Temperatura okoline |
+2 °C bis +50 °C |
| Mediji |
Komprimovani vazduh |
| Ostali podaci |
increases the pressure only where the force is insufficient due to low factory pressure (measure to save energy) no power supply required extended life: doubled compared to the conventional model improved reliability through built-in strainer on (IN terminal) Compressed air inlet reduced condensation: Venting channels directly integrated in the cylinder tube Reduced noise: 13 dB (A) |
Opis
Booster regulator, series VBA, increases pressure only where the force is inadequate because of a low network pressure (energy saving measure), no electricity supply necessary, longer service life: doubled compared to conventional model, lower operating noise level: 13 dB (A), improved operational reliability from inbuilt mesh filter on (IN connection) compressed air inlet, reduced condensation levels: air exhaust channels integrated directly into the cylinder tube, suitable for: compressed air, size 1/4, with pressure gauge and silencer, elbow, pneumatic connection: G 1/4, pneumatic connection pressure gauge: G 1/8, pneumatic connections pressure gauge: 2, flow rate 230 l/min, pressure boost 1:2, manually actuated pressure adjustment mechanism, test pressure: 3 MPa, max. operating pressure: 2 MPa, min. operating pressure: 0.2 MPa, media temperature: +2 to +50 °C, ambient temperature: +2 to +50 °C
Artikal
sortiranje nagore
sortiranje nadole
 Naziv |
Pneumatski priključak | Konstrukciona veličina | Mehanizam za podešavanje pritiska | Stanje pojačivača pritiska | Protok (L/min) |
maks. radni pritisak (MPa) |
Kontrolni pritisak (MPa) |
|---|---|---|---|---|---|---|---|
| K- 07 60 00 06 | G 1/4 | 1/4 | manually operated | 1:2 to 1:4 | 70 | 2,00 | 3,00 |
| K- 07 60 00 01 | G 1/4 | 1/4 | manually operated | 1:2 | 230 | 2,00 | 3,00 |
| K- 07 60 00 08 | G 3/8 | 3/8 | manually operated | 1:2 | 1000 | 1,00 | 1,50 |
| K- 07 60 00 12 | G 3/8 | 3/8 | pneumatically actuated | 1:2 | 1000 | 1,00 | 1,50 |
| K- 07 60 00 13 | G 1/2 | 1/2 | manually operated | 1:2 | 1900 | 1,00 | 1,50 |
| K- 07 60 00 14 | G 1/2 | 1/2 | pneumatically actuated | 1:2 | 1900 | 1,00 | 1,50 |
| K- 07 60 00 15 | G 1/2 | 1/2 | manually operated | 1:2 | 1600 | 1,60 | 2,40 |
Isključenje od odgovornosti
Uprkos pažljivom proveravanju, ne možemo isključiti greške i ne preuzimamo nikakvu garanciju za navedene podatke.
Svi podatci u našem onlajn katalogu počivaju na trenutno važećim normama i propisa od strane stručnih udruženja. Samo pridržavanje naših propisa uvezi montaže Vam garantuje sigurnost proizvoda. Ne pridržavanje svih navedenih propisa može negativno uticati na funkcionalnu sigurnost proizvoda i do gubitka prava na garanciju. Naša garancija au svakom slučaju važi sa proizvode firme HANSA-FLEX. Naši proizvodi se stalno dalje razvijaju, te zadržavamo prava na tehničke izmene.