Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
ICO
Metal hose
Item
Product versions
Create PDF 
Additional documents
HF-Fragebogen zur Auswahl von Metall-Schlauchleitungen_DE.pdf
HF-Questionnaire Choice of Metal Hose Lines_EN.pdf
HF-Technische_Informationen_Metallschläuche_DE.pdf
HF-Technical_Information_Metal_Hoses_EN.pdf
Product image
Properties
| Application |
Well suited for use in gas technology |
| Design |
parallel corrugation single wall normal corrugation |
| Hose material |
Stainless steel 1.4541 |
| Braiding |
without braiding |
| Standard |
DIN EN ISO 10380 |
| Temp. min. |
-200 °C |
| Temp. max. |
550 °C |
| Temp. |
applies for the hose only |
| Approval |
Approval for all gases according to DVGW Worksheet G 260, DIN 3384 |
Note
Please take into account the dynamic and thermal reduction factors with respect to the pressure values.
The pressure values listed apply to hoses only.
Item
Sort upwards
Sort downwards
 Identification |
Ø ID (mm) |
Ø AD (mm) |
Tolerances of ID/ED (mm) |
bend radius stat. (mm) |
bend radius dyn. (mm) |
OP at 20°C (stat.) (bar) |
Weight per m (kg) |
Production length (m) |
|---|---|---|---|---|---|---|---|---|
| ICO 010 | 10,60 | 16,10 | 0,30 | 35 | 125 | 5,0 | 0,110 | upon request |
| ICO 013 | 12,30 | 18,00 | 0,30 | 35 | 140 | 5,0 | 0,115 | upon request |
| ICO 016 | 15,70 | 23,70 | 0,40 | 45 | 190 | 4,0 | 0,175 | upon request |
| ICO 020 | 19,80 | 28,80 | 0,40 | 55 | 215 | 3,0 | 0,260 | upon request |
| ICO 025 | 25,80 | 34,50 | 0,40 | 70 | 250 | 3,0 | 0,320 | upon request |
| ICO 032 | 33,00 | 43,70 | 0,40 | 80 | 270 | 3,0 | 0,500 | upon request |
| ICO 040 | 40,00 | 52,00 | 0,50 | 100 | 320 | 2,0 | 0,630 | 10 to 12 |
| ICO 050 | 51,60 | 65,50 | 0,50 | 130 | 360 | 1,0 | 0,810 | 10 to 12 |
| ICO 065 | 66,00 | 85,40 | 0,60 | 175 | 450 | 1,0 | 1,380 | 10 to 12 |
| ICO 080 | 76,60 | 97,50 | 0,60 | 200 | 500 | 1,0 | 1,520 | 10 to 12 |
| ICO 100 | 103,00 | 125,00 | 1,00 | 250 | 600 | 1,0 | 2,150 | 10 to 12 |
| ICO 125 | 127,50 | 151,50 | 1,00 | 325 | 750 | 1,0 | 3,250 | 10 to 12 |
| ICO 150 | 151,50 | 177,00 | 1,00 | 375 | 850 | 0,8 | 4,100 | 10 to 12 |
| ICO 200 | 200,00 | 227,00 | 0,80 | 260 | 950 | 0,8 | 7,300 | 10 to 12 |
| ICO 250 | 250,00 | 282,00 | 0,80 | 340 | 1200 | 0,6 | 9,200 | 10 to 12 |
| ICO 300 | 300,00 | 335,00 | 1,00 | 420 | 1600 | 0,5 | 12,700 | 10 to 12 |
Ordering information
Other designs available on request
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.