UPG G
Coolant hoseAdditional documents
Product image
Properties
Application |
Coolant and lubricant lines for metal chipping processes. |
Design |
Steel support helix with PVC inner hose steel screw-in taps on both sides Surface nickel-plated |
Properties |
Completely tight can be bent into almost any position by hand tough resistant to oils, greases etc. |
Item
Sort upwards
Sort downwards
Identification | G1 | G2 | ID (mm) |
S1 (mm) |
Nominal length (+/-5 mm) |
---|---|---|---|---|---|
UPG G1/8-250 | R 1/8" | R 1/8" | 8,0 | 15,0 | 250 |
UPG G1/8-320 | R 1/8" | R 1/8" | 8,0 | 15,0 | 320 |
UPG G1/8-400 | R 1/8" | R 1/8" | 8,0 | 15,0 | 400 |
UPG G1/8-500 | R 1/8" | R 1/8" | 8,0 | 15,0 | 500 |
UPG G1/4-200 | R 1/4" | R 1/4" | 10,0 | 19,0 | 200 |
UPG G1/4-250 | R 1/4" | R 1/4" | 10,0 | 19,0 | 250 |
UPG G1/4-320 | R 1/4" | R 1/4" | 10,0 | 19,0 | 320 |
UPG G1/4-400 | R 1/4" | R 1/4" | 10,0 | 19,0 | 400 |
UPG G1/4-500 | R 1/4" | R 1/4" | 10,0 | 19,0 | 500 |
UPG G1/4-630 | R 1/4" | R 1/4" | 10,0 | 19,0 | 630 |
UPG G1/4-800 | R 1/4" | R 1/4" | 10,0 | 19,0 | 800 |
UPG G3/8-200 | R 3/8" | R 3/8" | 10,0 | 24,0 | 200 |
UPG G3/8-320 | R 3/8" | R 3/8" | 10,0 | 24,0 | 320 |
UPG G3/8-400 | R 3/8" | R 3/8" | 10,0 | 24,0 | 400 |
UPG G3/8-500 | R 3/8" | R 3/8" | 10,0 | 24,0 | 500 |
UPG G3/8-630 | R 3/8" | R 3/8" | 10,0 | 24,0 | 630 |
UPG G3/8-800 | R 3/8" | R 3/8" | 10,0 | 24,0 | 800 |
UPG G1/2-500 | R 1/2" | R 1/2" | 10,0 | 27,0 | 500 |
UPG G1/2-630 | R 1/2" | R 1/2" | 10,0 | 27,0 | 630 |
UPG G1/2-800 | R 1/2" | R 1/2" | 10,0 | 27,0 | 800 |
Ordering information
Other sizes on request
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.