ATS 100
PTFE smooth hose![](/images/down.gif)
![](/images/down.gif)
![](/images/pdf.png)
Additional documents
![](/images/pdf.png)
![](/images/pdf.png)
![](/images/pdf.png)
![](/images/pdf.png)
Product image
![ATS 100 ATS 100](/data/img/product/ATS_FOTO.jpg)
![ATS 100 - data/img/product/ATS_Zeichnung.jpg data/img/product/ATS_Zeichnung.jpg - ATS 100](/data/img/product/ATS_Zeichnung.jpg)
Properties
Application |
Medium pressure applications with hydraulic fluids and aggressive media |
Application |
Mainly for the chemical and food industries |
Design |
Smooth inliner made from multilayer, black PTFE antistatic design |
Properties |
The smooth inner liner prevents residue buildup in the hose Suitable for use with foodstuffs |
Hose material |
PTFE (polytetrafluoroethylene) |
Braiding |
1 braiding with 1.4301 / 1.4306 |
Temp. min. |
-70 °C |
Temp. max. |
260 °C |
Temp. |
applies for the hose only |
Approval |
the base material has been granted FDA approval. |
Note
The pressure values listed apply to hoses only.
The tubular fabric has a safety factor (SF) 3 against bursting
From 120 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 120 °C / 140 °C / 160 °C / 180 °C / 200 °C / 220 °C
Factor: 1,00 / 0,80 / 0,60 / 0,40 / 0,20 / 0,00
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Internal Ø min. (mm) |
Internal Ø max. (mm) |
External Ø min. (mm) |
External Ø max. (mm) |
Wall thickness (mm) |
Min. bending radius (mm) |
OP at 20°C (stat.) (bar) |
Weight per m (kg) |
---|---|---|---|---|---|---|---|---|
ATS 106 | 6,5 | 7,0 | 8,8 | 9,9 | 0,76 | 76 | 224,0 | 0,092 |
ATS 108 | 8,2 | 8,7 | 10,5 | 11,6 | 0,64 | 102 | 207,0 | 0,141 |
ATS 110 | 9,9 | 10,6 | 12,8 | 14,1 | 0,89 | 133 | 183,0 | 0,148 |
ATS 113 | 13,1 | 13,4 | 15,5 | 17,2 | 0,89 | 152 | 161,0 | 0,249 |
ATS 116 | 16,1 | 17,1 | 19,0 | 20,6 | 0,89 | 178 | 114,0 | 0,290 |
ATS 120 | 19,3 | 20,3 | 22,2 | 23,8 | 0,89 | 203 | 103,0 | 0,339 |
ATS 125 | 25,6 | 26,6 | 28,5 | 30,1 | 0,89 | 305 | 80,0 | 0,461 |
Ordering information
Other designs available on request
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.