Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
ATWE
PTFE corrugated hose
Item
Product versions
Create PDF 
Additional documents
HF-Fragebogen zur Auswahl von Metall-Schlauchleitungen_DE.pdf
HF-Questionnaire Choice of Metal Hose Lines_EN.pdf
HF-Technische_Informationen_Metallschläuche_DE.pdf
HF-Technical_Information_Metal_Hoses_EN.pdf
Product image
Properties
| Application |
Medium pressure applications with hydraulic fluids and aggressive media |
| Application |
Mainly for the chemical and food industries |
| Design |
coil-corrugated PTFE inliner in white PTFE |
| Properties |
Due to the wide curl good self-cleaning properties Suitable for use with foodstuffs |
| Hose material |
PTFE (polytetrafluoroethylene) |
| Braiding |
1 braiding with 1.4301 / 1.4306 |
| Temp. min. |
-70 °C |
| Temp. max. |
260 °C |
| Temp. |
applies for the hose only |
| Approval |
the base material has been granted FDA approval. |
Note
The pressure values listed apply to hoses only.
The tubular fabric has a safety factor (SF) 3 against bursting
From 120 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 120 °C / 140 °C / 160 °C / 180 °C / 200 °C / 220 °C
Factor: 1,00 / 0,80 / 0,60 / 0,40 / 0,20 / 0,00
Item
Sort upwards
Sort downwards
 Identification |
Internal Ø min. (mm) |
Internal Ø max. (mm) |
External Ø min. (mm) |
External Ø max. (mm) |
Wall thickness (mm) |
Min. bending radius (mm) |
OP at 20°C (stat.) (bar) |
Weight per m (kg) |
|---|---|---|---|---|---|---|---|---|
| ATWE 006 | 6,1 | 6,7 | 9,3 | 9,9 | 0,75 | 18 | 172,0 | 0,140 |
| ATWE 008 | 7,9 | 8,5 | 12,3 | 12,9 | 0,60 | 20 | 138,0 | 0,160 |
| ATWE 010 | 9,5 | 10,2 | 12,8 | 14,5 | 0,65 | 20 | 138,0 | 0,152 |
| ATWE 013 | 12,5 | 13,1 | 17,8 | 19,2 | 0,80 | 25 | 103,0 | 0,253 |
| ATWE 016 | 15,7 | 16,4 | 21,8 | 24,0 | 0,80 | 51 | 83,0 | 0,304 |
| ATWE 020 | 19,0 | 19,7 | 24,0 | 27,0 | 1,00 | 64 | 69,0 | 0,374 |
| ATWE 025 | 25,5 | 26,2 | 32,2 | 36,1 | 1,00 | 89 | 46,0 | 0,543 |
| ATWE 032 | 32,0 | 32,5 | 40,2 | 41,3 | 1,00 | 125 | 34,0 | 0,635 |
| ATWE 040 | 38,0 | 38,9 | 47,8 | 49,0 | 1,00 | 152 | 30,0 | 0,840 |
| ATWE 050 | 50,9 | 51,9 | 60,5 | 62,3 | 1,10 | 200 | 23,0 | 1,000 |
Ordering information
Other designs available on request
Product versions
This product is also available in the following designs:
- ATSE
- PTFE corrugated hose, coil-corrugated PTFE inliner in black PTFE
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.