HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

TF 200

PTFE hose, smooth, 2 braidings
Hide product imageProduct image
TF 200
Hide propertiesProperties
Application Medium pressure applications with hydraulic fluids and aggressive media
Application Mainly for the chemical and food industries
Design Smooth inliner in white PTFE
Properties The smooth inner liner prevents residue buildup in the hose
Suitable for use with foodstuffs
Braiding 2 braidings with 1.4301 / 1.4306
Inner layer PTFE
Outer layer none
Colour metallic
Temp. min. -70 °C
Temp. max. 260 °C
Temp. applies for the hose only
Material PTFE (polytetrafluoroethylene)
Approval the base material has been granted FDA approval.
Hide informationNote

The pressure values listed apply to hoses only.

The tubular fabric has a safety factor (SF) 3 against bursting

Not recommended for high dynamic pressure loads.

From 120 °C the pressure reduction factor is to be taken into account.

(Max. operating pressure = operating pressure x factor).

Temp.: 120 °C / 140 °C / 160 °C / 180 °C / 200 °C / 220 °C

Factor: 1,00 / 0,80 / 0,60 / 0,40 / 0,20 / 0,00

Hide product tableItem

Sort upwards

Sort downwards

DN = Nominal diameter, nominal width 

Hide ordering informationOrdering information

Other designs available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.