Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TF 200
PTFE hose, smooth, 2 braidings
Item
Create PDF 
Additional documents
HF-Fragebogen zur Auswahl von Metall-Schlauchleitungen_DE.pdf
HF-Questionnaire Choice of Metal Hose Lines_EN.pdf
HF-Technische_Informationen_Metallschläuche_DE.pdf
HF-Technical_Information_Metal_Hoses_EN.pdf
Product image
Properties
| Application |
Medium pressure applications with hydraulic fluids and aggressive media |
| Application |
Mainly for the chemical and food industries |
| Design |
Smooth inliner in white PTFE |
| Properties |
The smooth inner liner prevents residue buildup in the hose Suitable for use with foodstuffs |
| Braiding |
2 braidings with 1.4301 / 1.4306 |
| Inner layer |
PTFE |
| Outer layer |
none |
| Colour |
metallic |
| Temp. min. |
-70 °C |
| Temp. max. |
260 °C |
| Temp. |
applies for the hose only |
| Material |
PTFE (polytetrafluoroethylene) |
| Approval |
the base material has been granted FDA approval. |
Note
The pressure values listed apply to hoses only.
The tubular fabric has a safety factor (SF) 3 against bursting
Not recommended for high dynamic pressure loads.
From 120 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 120 °C / 140 °C / 160 °C / 180 °C / 200 °C / 220 °C
Factor: 1,00 / 0,80 / 0,60 / 0,40 / 0,20 / 0,00
Item
Sort upwards
Sort downwards
 Identification |
DN* | Inches | Size | Internal Ø min. (mm) |
Internal Ø max. (mm) |
External Ø min. (mm) |
External Ø max. (mm) |
Min. bending radius (mm) |
Operating pressure (bar) |
Test pressure (bar) |
Burst pressure (bar) |
Weight per m (kg) |
Production length (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TF 206 | 6 | 1/4" | 4 | 6,3 | 7,1 | 9,9 | 11,1 | 76 | 247,0 | 371 | 741 | 0,179 | 20 to 80 |
| TF 208 | 8 | 5/16" | 5 | 8,0 | 8,8 | 12,0 | 13,2 | 102 | 230,0 | 345 | 690 | 0,241 | 20 to 80 |
| TF 210 | 10 | 3/8" | 6 | 9,6 | 10,4 | 14,0 | 15,2 | 133 | 207,0 | 345 | 621 | 0,311 | 20 to 80 |
| TF 213 | 12 | 1/2" | 8 | 12,8 | 13,6 | 17,2 | 19,9 | 152 | 183,0 | 275 | 552 | 0,411 | 20 to 80 |
| TF 216 | 16 | 5/8" | 10 | 16,1 | 17,1 | 20,3 | 21,7 | 178 | 138,0 | 207 | 414 | 0,470 | 10 to 20 |
| TF 220 | 19 | 3/4" | 12 | 19,2 | 20,4 | 23,5 | 25,2 | 203 | 126,0 | 189 | 379 | 0,551 | 10 to 20 |
| TF 225 | 25 | 1" | 16 | 25,5 | 26,7 | 29,9 | 31,6 | 305 | 103,0 | 155 | 310 | 0,732 | 10 to 20 |
DN = Nominal diameter, nominal width
Ordering information
Other designs available on request
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.