AFW
PTFE corrugated hose![](/images/down.gif)
![](/images/down.gif)
![](/images/pdf.png)
Additional documents
![](/images/pdf.png)
![](/images/pdf.png)
![](/images/pdf.png)
![](/images/pdf.png)
Product image
![AFW AFW](/data/img/product/AFW_FOTO.jpg)
![AFW - data/img/product/AFS-AFW_Zeichnung_1.jpg data/img/product/AFS-AFW_Zeichnung_1.jpg - AFW](/data/img/product/AFS-AFW_Zeichnung_1.jpg)
Properties
Application |
Low pressure applications with hydraulic fluids and aggressive media |
Application |
Mainly for the chemical and food industries |
Design |
coil-corrugated PTFE inliner in white PTFE |
Properties |
The inliner flanged connection fittings impart good self-cleaning properties when media are passed through the hoses The through-led product is only in contact with the PTFE material |
Hose material |
PTFE (polytetrafluoroethylene) |
Braiding |
without braiding |
Temp. min. |
-70 °C |
Temp. max. |
260 °C |
Temp. |
applies for the hose only |
Approval |
the base material has been granted FDA approval. |
Note
The pressure values listed apply to hoses only.
The tubular fabric has a safety factor (SF) 3 against bursting
From 120 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 120 °C / 140 °C / 160 °C / 180 °C / 200 °C / 220 °C
Factor: 1,00 / 0,80 / 0,60 / 0,40 / 0,20 / 0,00
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Internal Ø min. (mm) |
Internal Ø max. (mm) |
External Ø min. (mm) |
External Ø max. (mm) |
Wall thickness (mm) |
Min. bending radius (mm) |
OP at 20°C (stat.) (bar) |
Vacuum (mbar) |
Weight per m (kg) |
---|---|---|---|---|---|---|---|---|---|
AFW 006 | 5,5 | 6,9 | 9,9 | 11,5 | 0,52 | 25 | 4,0 | 744 | 0,047 |
AFW 010 | 8,5 | 10,5 | 13,2 | 14,7 | 0,62 | 25 | 4,0 | 744 | 0,058 |
AFW 013 | 11,6 | 13,6 | 16,4 | 18,2 | 0,82 | 50 | 4,0 | 887 | 0,072 |
AFW 016 | 15,1 | 16,4 | 21,2 | 23,2 | 0,88 | 65 | 3,0 | 887 | 0,097 |
AFW 020 | 19,5 | 20,5 | 26,6 | 29,4 | 1,00 | 55 | 3,0 | 887 | 0,142 |
AFW 025 | 24,5 | 25,5 | 32,2 | 36,2 | 1,10 | 85 | 3,0 | 887 | 0,194 |
AFW 032 | 31,5 | 32,5 | 39,9 | 44,1 | 1,15 | 100 | 2,5 | 887 | 0,258 |
AFW 040 | 36,5 | 37,5 | 44,6 | 49,4 | 1,45 | 120 | 2,5 | 887 | 0,377 |
AFW 050 | 49,5 | 50,5 | 57,9 | 64,1 | 1,50 | 165 | 2,0 | 887 | 0,522 |
AFW 065 | 62,5 | 63,5 | 77,9 | 86,1 | 1,60 | 230 | 1,5 | 887 | 0,654 |
AFW 080 | 73,5 | 74,5 | 87,4 | 96,6 | 1,60 | 260 | 1,3 | 887 | 0,765 |
AFW 100 | 94,5 | 99,5 | 118,1 | 124,5 | 1,82 | 300 | 1,0 | 887 | 1,310 |
Ordering information
AFWA design with 1.4301 / 1.4306 stainless steel braiding upon request.
AFWP design with polypropylene braiding (suitable for use up to max. 90°C) upon request.
Product versions
![](/images/up.gif)
This product is also available in the following designs:
- AFS
- PTFE corrugated hose, coil-corrugated PTFE inliner in black PTFE
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.