Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
GE HRK AB
Screw-in sockets
Product image
Properties
| Connection 1 |
BSPT conical external threads |
| Sealing form 1 |
thread seal |
| Connection 2 |
BSP nut thread |
| Sealing form 2 |
60° inner cone |
| Design |
Screw-in sockets |
| Construction |
straight |
| Material |
Steel |
| Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
 Identification |
G1 | G2 | AF (mm) |
S1 |
|---|---|---|---|---|
| GE HRK 02 AB | R 1/8" K | G 1/8" -28 | 14 | 14 |
| GE HRK 04 AB | R 1/4" K | G 1/4" -19 | 19 | 19 |
| GE HRK 06 AB | R 3/8" K | G 3/8" -19 | 22 | 22 |
| GE HRK 06 AB 08 | R 3/8" K | G 1/2" -14 | 22 | 27 |
| GE HRK 08 AB 06 | R 1/2" K | G 3/8" -19 | 27 | 22 |
| GE HRK 08 AB | R 1/2" K | G 1/2" -14 | 27 | 27 |
| GE HRK 10 AB | R 5/8" K | G 5/8" -14 | 30 | 30 |
| GE HRK 12 AB 08 | R 3/4" K | G 1/2" -14 | 37 | 27 |
| GE HRK 12 AB | R 3/4" K | G 3/4" -14 | 37 | 37 |
| GE HRK 16 AB 12 | R 1" K | G 3/4" -14 | 41 | 37 |
| GE HRK 16 AB | R 1" K | G 1" -11 | 41 | 41 |
| GE HRK 20 AB | R 1.1/4" K | G 1.1/4" -11 | 50 | 50 |
| GE HRK 24 AB | R 1.1/2" K | G 1.1/2" -11 | 55 | 60 |
| GE HRK 32 AB | R 2" K | G 2" -11 | 64 | 67 |
SW, S1, S2 = With across flats
Product versions
This product is also available in the following designs:
- GE HRK AB VA
- Screw-in sockets, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.