GE HRED HB
Screw-in sockets
Product image
![GE HRED HB GE HRED HB](/data/img/product/GE_HRED_HB.jpg)
![GE HRED HB - data/img/product/GE_HR_ED_HB_Zeichnung.jpg data/img/product/GE_HR_ED_HB_Zeichnung.jpg - GE HRED HB](/data/img/product/GE_HR_ED_HB_Zeichnung.jpg)
Properties
Connection 1 |
BSP external thread, cylindrical |
Sealing form 1 |
Shape E |
Connection 2 |
BSP cylindrical external threads |
Sealing form 2 |
60° inner cone |
Design |
Screw-in sockets |
Construction |
straight |
Material |
Steel |
Surface |
electro galvanised |
Note
Can be used as a screwing agent with ED and as a connector with 60° inside taper
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
G1 | G2 | L1 (mm) |
AF (mm) |
---|---|---|---|---|
GE HRED 02 HB | G 1/8" -28 | G 1/8" -28 | 24,0 | 14 |
GE HRED 04 HB 02 | G 1/4" -19 | G 1/8" -28 | 28,5 | 19 |
GE HRED 04 HB | G 1/4" -19 | G 1/4" -19 | 33,0 | 19 |
GE HRED 04 HB 06 | G 1/4" -19 | G 3/8" -19 | 34,5 | 19 |
GE HRED 06 HB 04 | G 3/8" -19 | G 1/4" -19 | 33,5 | 22 |
GE HRED 06 HB | G 3/8" -19 | G 3/8" -19 | 35,0 | 22 |
GE HRED 06 HB 08 | G 3/8" -19 | G 1/2" -14 | 38,5 | 22 |
GE HRED 08 HB 06 | G 1/2" -14 | G 3/8" -19 | 37,5 | 27 |
GE HRED 08 HB | G 1/2" -14 | G 1/2" -14 | 41,0 | 27 |
GE HRED 08 HB 10 | G 1/2" -14 | G 5/8" -14 | 43,0 | 27 |
GE HRED 08 HB 12 | G 1/2" -14 | G 3/4" -14 | 45,0 | 32 |
GE HRED 12 HB 08 | G 3/4" -14 | G 1/2" -14 | 43,0 | 32 |
GE HRED 12 HB | G 3/4" -14 | G 3/4" -14 | 47,0 | 32 |
GE HRED 12 HB 16 | G 3/4" -14 | G 1" -11 | 51,0 | 32 |
GE HRED 16 HB 12 | G 1" -11 | G 3/4" -14 | 49,0 | 41 |
GE HRED 16 HB | G 1" -11 | G 1" -11 | 53,0 | 41 |
GE HRED 20 HB 16 | G 1.1/4" -11 | G 1" -11 | 55,0 | 50 |
GE HRED 20 HB | G 1.1/4" -11 | G 1.1/4" -11 | 58,0 | 50 |
GE HRED 24 HB | G 1.1/2" -11 | G 1.1/2" -11 | 64,0 | 55 |
AF = Width across flats
Spare parts
![](/images/up.gif)
- WD
- Soft seal for ED fittings
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.