Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
GE HROK AOB
Screw-in sockets
Product image
Properties
| Connection 1 |
BSP external thread, cylindrical |
| Sealing form 1 |
Thread socket with O-ring + spacer diaphragm ring |
| Connection 2 |
BSP nut thread |
| Sealing form 2 |
60° outer cone with O-ring |
| Design |
Screw-in sockets |
| Construction |
straight |
| Material |
Steel |
| Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
 Identification |
G1 + G2 | AF (mm) |
S1 | OR1 | OR2 |
|---|---|---|---|---|---|
| GE HROK 04 AOB | G 1/4" -19 | 20 | 17 | 10.77 x 2.62 | 6.0 x 1.0 |
| GE HROK 06 AOB | G 3/8" -19 | 24 | 22 | 13.94 x 2.62 | 8.1 x 1.6 |
| GE HROK 08 AOB | G 1/2" -14 | 28 | 27 | 17.86 x 2.62 | 12.1 x 1.6 |
| GE HROK 12 AOB | G 3/4" -14 | 35 | 32 | 23.47 x 2.62 | 17.1 x 1.6 |
| GE HROK 16 AOB | G 1" -11 | 43 | 41 | 29.75 x 3.53 | 22.1 x 1.6 |
| GE HROK 20 AOB | G 1.1/4" -11 | 52 | 50 | 37.69 x 3.53 | 29.1 x 1.6 |
| GE HROK 24 AOB | G 1.1/2" -11 | 58 | 60 | 44.04 x 3.53 | 35.1 x 1.6 |
SW, S1, S2 = With across flats
Spare parts
- KAMMRING G
- Spacer diaphragm ring, imperial
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.