GE HMO HB
Screw-in sockets
Product image
![GE HMO HB GE HMO HB](/data/img/product/GE_HMO_HB_Foto.jpg)
![GE HMO HB - data/img/product/GE_HRO_HB_MEx.gif data/img/product/GE_HRO_HB_MEx.gif - GE HMO HB](/data/img/product/GE_HRO_HB_MEx.gif)
Properties
Connection 1 |
metric cylindrical outer thread |
Sealing form 1 |
O-ring seal on screw-in socket |
Connection 2 |
BSP cylindrical external threads |
Sealing form 2 |
60° inner cone |
Design |
Screw-in sockets |
Construction |
straight |
Material |
Steel |
Surface |
electro galvanised |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
G1 | G2 | AF (mm) |
OR |
---|---|---|---|---|
GE HMO 10 HB 02 | M 10 x 1 | G 1/8" -28 | 15 | 8.00 x 1.50 |
GE HMO 12 HB 02 | M 12 x 1.5 | G 1/8" -28 | 18 | 9.30 x 2.30 |
GE HMO 12 HB 04 | M 12 x 1.5 | G 1/4" -19 | 18 | 9.30 x 2.30 |
GE HMO 14 HB 04 | M 14 x 1.5 | G 1/4" -19 | 20 | 11.30 x 2.30 |
GE HMO 14 HB 06 | M 14 x 1.5 | G 3/8" -19 | 20 | 11.30 x 2.30 |
GE HMO 16 HB 04 | M 16 x 1.5 | G 1/4" -19 | 22 | 13.30 x 2.30 |
GE HMO 16 HB 06 | M 16 x 1.5 | G 3/8" -19 | 22 | 13.30 x 2.30 |
GE HMO 18 HB 06 | M 18 x 1.5 | G 3/8" -19 | 24 | 15.30 x 2.30 |
GE HMO 18 HB 08 | M 18 x 1.5 | G 1/2" -14 | 24 | 15.30 x 2.30 |
GE HMO 20 HB 08 | M 20 x 1.5 | G 1/2" -14 | 28 | 17.30 x 2.30 |
GE HMO 22 HB 08 | M 22 x 1.5 | G 1/2" -14 | 28 | 19.30 x 2.30 |
GE HMO 22 HB 10 | M 22 x 1.5 | G 5/8" -14 | 28 | 19.30 x 2.30 |
GE HMO 22 HB 12 | M 22 x 1.5 | G 3/4" -14 | 28 | 19.30 x 2.30 |
GE HMO 27 HB 12 | M 27 x 2 | G 3/4" -14 | 33 | 23.47 x 2.95 |
GE HMO 27 HB 16 | M 27 x 2 | G 1" -11 | 33 | 23.47 x 2.95 |
GE HMO 33 HB 16 | M 33 x 2 | G 1" -11 | 42 | 29.74 x 2.95 |
GE HMO 42 HB 20 | M 42 x 2 | G 1.1/4" -11 | 50 | 38.00 x 3.00 |
GE HMO 48 HB 24 | M 48 x 2 | G 1.1/2" -11 | 56 | 44.00 x 3.00 |
AF = Width across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.