W90 HB HJ
Connection socket, angle 90°Product image
Properties
Connection 1 |
BSP external thread, cylindrical |
Sealing form 1 |
60° inner cone |
Connection 2 |
UN/UNF external threads |
Sealing form 2 |
74° outer cone |
Design |
Connection sockets |
Construction |
Angle 90° |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | G1 | G2 | AF (mm) |
---|---|---|---|
W90 HB 04 HJ | G 1/4" -19 | 7/16"-20 UNF | 14 |
W90 HB 04 HJ 05 | G 1/4" -19 | 1/2"-20 UNF | 14 |
W90 HB 04 HJ 06 | G 1/4" -19 | 9/16"-18 UNF | 14 |
W90 HB 06 HJ | G 3/8" -19 | 9/16"-18 UNF | 19 |
W90 HB 06 HJ 08 | G 3/8" -19 | 3/4"-16 UNF | 19 |
W90 HB 08 HJ | G 1/2" -14 | 3/4"-16 UNF | 22 |
W90 HB 08 HJ 10 | G 1/2" -14 | 7/8"-14 UNF | 22 |
W90 HB 10 HJ | G 5/8" -14 | 7/8"-14 UNF | 22 |
W90 HB 12 HJ | G 3/4" -14 | 1.1/16" -12 UN | 27 |
W90 HB 16 HJ | G 1" -11 | 1.5/16" -12 UN | 33 |
AF = Width across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.