W90 AJ HJ VA
Screw-on socket, angle 90°Product image
Properties
Connection 1 |
UN/UNF nut threads |
Sealing form 1 |
74° inner cone |
Connection 2 |
UN/UNF external threads |
Sealing form 2 |
74° outer cone |
Design |
Screw-on socket |
Construction |
Angle 90° |
Material |
Stainless steel |
Item
Sort upwards
Sort downwards
Identification | G1 | G2 | AF (mm) |
S1 |
---|---|---|---|---|
W90 AJ 04 HJ VA | 7/16"-20 UNF | 7/16"-20 UNF | 11 | 16 |
W90 AJ 05 HJ VA | 1/2"-20 UNF | 1/2"-20 UNF | 13 | 17 |
W90 AJ 06 HJ VA | 9/16"-18 UNF | 9/16"-18 UNF | 14 | 19 |
W90 AJ 08 HJ VA | 3/4"-16 UNF | 3/4"-16 UNF | 19 | 22 |
W90 AJ 10 HJ VA | 7/8" -14 UNF | 7/8"-14 UNF | 22 | 27 |
W90 AJ 12 HJ VA | 1.1/16" -12 UN | 1.1/16" -12 UN | 27 | 32 |
W90 AJ 16 HJ VA | 1.5/16" -12 UN | 1.5/16" -12 UN | 33 | 38 |
W90 AJ 20 HJ VA | 1.5/8" -12 UN | 1.5/8" -12 UN | 41 | 50 |
W90 AJ 24 HJ VA | 1.7/8" -12 UN | 1.7/8" -12 UN | 48 | 55 |
SW, S1, S2 = With across flats
Product versions
This product is also available in the following designs:
- W90 AJ HJ
- Screw-on socket, angle 90°, Steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.