W90 HROK HJ
Screw-in socket, angle 90°Product image
Properties
Connection 1 |
BSP external thread, cylindrical |
Sealing form 1 |
Thread socket with O-ring + spacer diaphragm ring |
Connection 2 |
UN/UNF external threads |
Sealing form 2 |
74° outer cone |
Design |
Adjustable direction screw-in socket |
Construction |
Angle 90° |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | G1 | G2 | AF (mm) |
S1 | OR |
---|---|---|---|---|---|
W90 HROK 02 HJ 04 | G 1/8" -28 | 7/16"-20 UNF | 12 | 14 | 7.97 x 1.88 |
W90 HROK 02 HJ 05 | G 1/8" -28 | 1/2"-20 UNF | 14 | 14 | 7.97 x 1.88 |
W90 HROK 04 HJ | G 1/4" -19 | 7/16"-20 UNF | 14 | 19 | 10.77 x 2.62 |
W90 HROK 04 HJ 05 | G 1/4" -19 | 1/2"-20 UNF | 14 | 19 | 10.77 x 2.62 |
W90 HROK 04 HJ 06 | G 1/4" -19 | 9/16"-18 UNF | 14 | 19 | 10.77 x 2.62 |
W90 HROK 04 HJ 08 | G 1/4" -19 | 3/4"-16 UNF | 19 | 19 | 10.77 x 2.62 |
W90 HROK 06 HJ 04 | G 3/8" -19 | 7/16"-20 UNF | 19 | 22 | 13.94 x 2.62 |
W90 HROK 06 HJ 05 | G 3/8" -19 | 1/2"-20 UNF | 19 | 22 | 13.94 x 2.62 |
W90 HROK 06 HJ | G 3/8" -19 | 9/16"-18 UNF | 19 | 22 | 13.94 x 2.62 |
W90 HROK 06 HJ 08 | G 3/8" -19 | 3/4"-16 UNF | 19 | 22 | 13.94 x 2.62 |
W90 HROK 06 HJ 10 | G 3/8" -19 | 7/8"-14 UNF | 22 | 22 | 13.94 x 2.62 |
W90 HROK 08 HJ 04 | G 1/2" -14 | 7/16"-20 UNF | 19 | 27 | 17.86 x 2.62 |
W90 HROK 08 HJ | G 1/2" -14 | 3/4"-16 UNF | 22 | 27 | 17.86 x 2.62 |
W90 HROK 08 HJ 06 | G 1/2" -14 | 9/16"-18 UNF | 22 | 27 | 17.86 x 2.62 |
W90 HROK 08 HJ 10 | G 1/2" -14 | 7/8"-14 UNF | 22 | 27 | 17.86 x 2.62 |
W90 HROK 08 HJ 12 | G 1/2" -14 | 1.1/16" -12 UN | 27 | 27 | 17.86 x 2.62 |
W90 HROK 10 HJ | G 5/8" -14 | 7/8"-14 UNF | 22 | 30 | 19.70 x 2.62 |
W90 HROK 12 HJ 08 | G 3/4" -14 | 3/4"-16 UNF | 27 | 36 | 23.47 x 2.62 |
W90 HROK 12 HJ 10 | G 3/4" -14 | 7/8"-14 UNF | 27 | 36 | 23.47 x 2.62 |
W90 HROK 12 HJ | G 3/4" -14 | 1.1/16" -12 UN | 27 | 36 | 23.47 x 2.62 |
W90 HROK 12 HJ 14 | G 3/4" -14 | 1.3/16" -12 UN | 33 | 36 | 23.47 x 2.62 |
W90 HROK 12 HJ 16 | G 3/4" -14 | 1.5/16" -12 UN | 33 | 36 | 23.47 x 2.62 |
W90 HROK 16 HJ 12 | G 1" -11 | 1.1/16" -12 UN | 33 | 41 | 29.74 x 3.53 |
W90 HROK 16 HJ | G 1" -11 | 1.5/16" -12 UN | 33 | 41 | 29.74 x 3.53 |
W90 HROK 16 HJ 20 | G 1" -11 | 1.5/8" -12 UN | 41 | 41 | 29.74 x 3.53 |
W90 HROK 20 HJ 16 | G 1.1/4" -11 | 1.5/16" -12 UN | 41 | 50 | 37.69 x 3.53 |
W90 HROK 20 HJ | G 1.1/4" -11 | 1.5/8" -12 UN | 41 | 50 | 37.69 x 3.53 |
W90 HROK 20 HJ 24 | G 1.1/4" -11 | 1.7/8" -12 UN | 48 | 50 | 37.69 x 3.53 |
W90 HROK 24 HJ | G 1.1/2" -11 | 1.7/8" -12 UN | 48 | 55 | 44.04 x 3.53 |
SW, S1, S2 = With across flats
Spare parts
- KAMMRING G
- Spacer diaphragm ring, imperial
Product versions
This product is also available in the following designs:
- W90 HROK HJ VA
- Screw-in socket, angle 90°, Stainless steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.