W90 HROK HJ VA
Screw-in socket, angle 90°Product image
Properties
Connection 1 |
BSP external thread, cylindrical |
Sealing form 1 |
Thread socket with O-ring + spacer diaphragm ring |
Connection 2 |
UN/UNF external threads |
Sealing form 2 |
74° outer cone |
Design |
Adjustable direction screw-in socket |
Construction |
Angle 90° |
Material |
Stainless steel |
Item
Sort upwards
Sort downwards
Identification | G1 | G2 | AF (mm) |
S1 | OR |
---|---|---|---|---|---|
W90 HROK 02 HJ 04 VA | G 1/8" -28 | 7/16"-20 UNF | 11 | 14 | 8.00 x 2.00 |
W90 HROK 04 HJ VA | G 1/4" -19 | 7/16"-20 UNF | 14 | 19 | 10.78 x 2.62 |
W90 HROK 04 HJ 05 VA | G 1/4" -19 | 1/2"-20 UNF | 14 | 19 | 10.78 x 2.62 |
W90 HROK 04 HJ 06 VA | G 1/4" -19 | 9/16"-18 UNF | 14 | 19 | 10.78 x 2.62 |
W90 HROK 06 HJ VA | G 3/8" -19 | 9/16"-18 UNF | 19 | 22 | 13.94 x 2.62 |
W90 HROK 06 HJ 08 VA | G 3/8" -19 | 3/4"-16 UNF | 19 | 22 | 13.94 x 2.62 |
W90 HROK 08 HJ VA | G 1/2" -14 | 3/4"-16 UNF | 22 | 27 | 17.86 x 2.62 |
W90 HROK 08 HJ 10 VA | G 1/2" -14 | 7/8"-14 UNF | 22 | 27 | 17.86 x 2.62 |
W90 HROK 08 HJ 12 VA | G 1/2" -14 | 1.1/16" -12 UN | 27 | 27 | 17.86 x 2.62 |
W90 HROK 12 HJ VA | G 3/4" -14 | 1.1/16" -12 UN | 27 | 36 | 23.47 x 2.62 |
W90 HROK 12 HJ 16 VA | G 3/4" -14 | 1.5/16" -12 UN | 33 | 36 | 23.47 x 2.62 |
W90 HROK 16 HJ VA | G 1" -11 | 1.5/16" -12 UN | 33 | 41 | 29.74 x 3.53 |
W90 HROK 16 HJ 20 VA | G 1" -11 | 1.5/8" -12 UN | 41 | 41 | 29.74 x 3.53 |
W90 HROK 20 HJ VA | G 1.1/4" -11 | 1.5/8" -12 UN | 41 | 50 | 37.69 x 3.53 |
W90 HROK 20 HJ 24 VA | G 1.1/4" -11 | 1.7/8" -12 UN | 48 | 50 | 37.69 x 3.53 |
W90 HROK 24 HJ VA | G 1.1/2" -11 | 1.7/8" -12 UN | 48 | 55 | 44.04 x 3.53 |
SW, S1, S2 = With across flats
Ordering information
Seals of NBR
FPM (Viton) on request
Spare parts
- KAMMRING G
- Spacer diaphragm ring, imperial
Product versions
This product is also available in the following designs:
- W90 HROK HJ
- Screw-in socket, angle 90°, Steel
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.