BZL VA / BZS VA
Lock without union nutProduct image
Properties
Sealing form 1 |
24° outer cone with O-ring |
Design |
Lock without union nut |
Construction |
straight |
Standard |
DIN 2353 ISO 8434-1 |
Material |
Stainless steel |
Note
Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.
Item
Sort upwards
Sort downwards
Identification | Series | Operating pressure | Ø d1 (mm) |
Ø d2 (mm) |
L1 (mm) |
OR |
---|---|---|---|---|---|---|
BZL NW 04 VA | L | PN 315 | 6,6 | 6 | 18,5 | 4.0 x 1.5 |
BZL NW 06 VA | L | PN 315 | 8,5 | 8 | 18,0 | 6.0 x 1.5 |
BZL NW 08 VA | L | PN 315 | 10,6 | 10 | 19,5 | 7.5 x 1.5 |
BZL NW 10 VA | L | PN 315 | 12,6 | 12 | 19,0 | 9.0 x 1.5 |
BZL NW 13 VA | L | PN 315 | 15,5 | 15 | 19,0 | 12.0 x 2.0 |
BZL NW 16 VA | L | PN 315 | 18,6 | 18 | 22,0 | 15.0 x 2.0 |
BZL NW 20 VA | L | PN 160 | 22,6 | 22 | 22,0 | 20.0 x 2.0 |
BZL NW 25 VA | L | PN 160 | 28,5 | 28 | 23,5 | 26.0 x 2.0 |
BZL NW 32 VA | L | PN 160 | 36,0 | 35 | 27,0 | 32.0 x 2.5 |
BZL NW 40 VA | L | PN 160 | 43,0 | 42 | 27,5 | 38.0 x 2.5 |
BZS NW 03 VA | S | PN 630 | - | 6 | 18,5 | 4.0 x 1.5 |
BZS NW 04 VA | S | PN 630 | - | 8 | 18,5 | 6.0 x 1.5 |
BZS NW 06 VA | S | PN 630 | - | 10 | 20,0 | 7.5 x 1.5 |
BZS NW 08 VA | S | PN 630 | - | 12 | 20,5 | 9.0 x 1.5 |
BZS NW 10 VA | S | PN 630 | 14,5 | 14 | 21,0 | 10.0 x 2.0 |
BZS NW 13 VA | S | PN 400 | 16,5 | 16 | 22,0 | 12.0 x 2.0 |
BZS NW 16 VA | S | PN 400 | 20,9 | 20 | 26,5 | 16.0 x 2.5 |
BZS NW 20 VA | S | PN 400 | 25,9 | 25 | 27,5 | 20.0 x 2.5 |
BZS NW 25 VA | S | PN 400 | 31,0 | 30 | 28,5 | 25.0 x 2.5 |
BZS NW 32 VA | S | PN 315 | 39,0 | 38 | 32,5 | 33.0 x 2.5 |
Series: LL = Very light L = Light S = Heavy – PN = Nominal pressure PB = Max. operating pressure – Ø = External pipe diameter
Product versions
This product is also available in the following designs:
- BZL / BZS
- Lock without union nut, Steel
- BZL / BZS MG
- Lock without union nut, Brass
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.