Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-KDR SCHNVERSCHR
Mini pressure regulators, discharge port on thread, quick-lock screw fitting
Product image
Properties
| Control range |
0 - 8 bar |
| Input pressure |
Max. 10 bar |
| Temp. range |
0 °C to +70 °C |
| Hollow screw, pivot arm, regulating screw |
Nickel-plated brass |
| Internal parts |
Brass with a bare metal surface |
| lip seal O-ring |
NBR |
| Seals (non-detachable) |
Polyamide (glass fibre-reinforced) |
Description
Piston pressure regulator with self-relieving design, hollow bolt and pivoting ring piece. The regulator is screwed directly into the consumer (e.g. cylinder, handling equipment, etc.). The working pressure can thus be adapted to the specific application.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
C (mm) |
for hose | Thread | AF | B (mm) |
|---|---|---|---|---|---|
| K- 07 25 08 33 | 16,0 | G 1/8 IG | G 1/8 | 15 mm | 56,0 |
| K- 07 25 08 34 | 25,0 | 5 mm / 3 mm | G 1/8 | 15 mm | 56,0 |
| K- 07 25 08 35 | 25,0 | 6 mm / 4 mm | G 1/8 | 15 mm | 56,0 |
| K- 07 25 08 36 | 25,0 | 8 mm / 6 mm | G 1/8 | 15 mm | 56,0 |
| K- 07 25 08 31 | 26,5 | 6 mm / 4 mm | G 1/4 | 17 mm | 63,0 |
| K- 07 25 08 32 | 27,5 | 8 mm / 6 mm | G 1/4 | 17 mm | 63,0 |
| K- 07 25 08 30 | 28,5 | 10 mm / 8 mm | G 1/4 | 17 mm | 63,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.