Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-STOPPVENTILE STECK
Stop valves, ports 2 and 3 with plug connection
Product image
Properties
| Working pressure |
Max. 10 bar |
| Pilot pressure |
1 - 5 bar, depending on operating pressure |
| Media temperature |
max. 70 °C |
| Installation position |
Any. Ring pieces can still be rotated 360° after the valve has been tightened |
| Sealant |
Perbunan |
Description
For high-speed positioning and stop functions as well as emergency switching (e.g. emergency stop). If a control signal is present at port 3, air can flow to and from the cylinder. If no control signal is present, the air flow to and from the cylinder is shut off, causing the cylinder to stop in the required position. Stop valves are screwed directly onto the cylinder instead of the normal pipe connections.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Port 1 | Port 2 | Connection 3 | Material | B (mm) |
C (mm) |
|---|---|---|---|---|---|---|
| K- 07 15 20 50 | G 1/8 | 6 mm | 4 mm | Nickel-plated brass | 52,0 | 25,0 |
| K- 07 15 20 49 | G 1/4 | 6 mm | 4 mm | Nickel-plated brass | 58,0 | 28,0 |
| K- 07 15 20 51 | G 3/8 | 8 mm | 4 mm | Nickel-plated brass | 63,0 | 32,0 |
| K- 07 15 20 48 | G 1/2 | 12 mm | 4 mm | Nickel-plated brass | 72,0 | 41,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.