HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

K-HS RD

Unidirectional banjo valves, pneumatic release, port 2 with female thread
Hide product imageProduct image
K-HS RD data/img/product/00042529_0.jpg - K-HS RD
Hide propertiesProperties
Working pressure 0.3 - 10 bar
Pilot pressure 0.5 - 2.5 bar, depending on operating pressure
Media temperature max. 60 °C
Installation position Any. The ring piece must be positioned before the valve is tightened
Material Nickel-plated brass
Sealant Perbunan
Hide descriptionDescription

For stopping and positioning the cylinder movement: If a control signal is present at port 3 (see drawing), air can flow to and from the cylinder. If no control signal is present, the cylinder exhaust air is shut off by the unidirectional valve.
The cylinder is stopped. Releasable unidirectional valves are screwed directly onto the cylinder instead of the normal pipe connections.

Hide informationNote

Further information on request

Hide product tableItem

Sort upwards

Sort downwards

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.