Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-ODER-VENTIL
OR valves
Product image
Properties
| Operating pressure |
2 - 10 bar |
| Temp. range |
-10 °C to +80 °C |
| Flow rate at 6,3 bar and 1 bar |
500 Nl/min (G 1/8), 1300 Nl/min (G 1/4) |
| Valve body |
Aluminium |
| Ball |
Stainless steel |
| Seals |
NBR |
Description
The valve has two inlets and one outlet. A signal appears at the outlet when the left or right inlet is pressurised.
If the pressure at the two inlets is different, the stronger of the two signals appears at the outlet.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | A (mm) |
B (mm) |
|---|---|---|---|
| K- 07 15 26 05 | 3 x G 1/8 | 36,0 | 20,0 |
| K- 07 15 26 04 | 3 x G 1/4 | 43,0 | 25,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.