HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

K-VENTILSCHEIBE HDM 6

Valve discs for HDM valve terminal with 6 mm port
Hide product imageProduct image
K-VENTILSCHEIBE HDM 6
Hide propertiesProperties
Media Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous.
Working pressure Max. vacuum 10 bar (external pilots), 3 to 7 bar (internal pilots as standard)
Pilot pressure 3 - 7 bar
Temp. range -10 °C to +60 °C
Flow rate 200 Nl/min (Ø 4), 500 Nl/min (Ø 6), 800 Nl/min (Ø 8)
No. of pilots Max. 16 (e.g. 16 spring return valves)
Manual control Latching (bistable), Monostable (non-latching) version also available on request
Power input 0.6 W per pilot
Protection IP IP 65
Hide descriptionDescription

These compact valve terminals, with a maximum flow rate of 800 Nl/min, can be individually adapted to the specific conditions of each application thanks tot he wide range of functions and various input and intermediate plates.Since each valve terminal is a customer-specific combination of a series of individual elements, the catalogue only lists the available input, intermediate and end plates as well as the different valve discs and the 25-pin multi-pole connectors.

Hide informationNote

Further information on request

Hide product tableItem

Sort upwards

Sort downwards

Hide additional informationAdditional information

Important: The scope of supply does not include a connector. Please order separately.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.