K-FI REGL PC-BEHAEL S H ABL STANDAR
Filter regulators with polycarbonate bowl, bowl guard and semi-automatic drain valve
Product image
![K-FI REGL PC-BEHAEL S H ABL STANDAR K-FI REGL PC-BEHAEL S H ABL STANDAR](/data/img/product/00043165_0.jpg)
![K-FI REGL PC-BEHAEL S H ABL STANDAR - data/img/product/00042519_0.jpg data/img/product/00042519_0.jpg - K-FI REGL PC-BEHAEL S H ABL STANDAR](/data/img/product/00042519_0.jpg)
Properties
Input pressure |
Max. 16 bar (polycarbonate bowl), Max. 25 bar (metal bowl) |
Control range |
0.5 to 10 bar (polycarbonate bowl), 0.5 to 16 bar (metal bowl) |
Media temperature |
max. 60 °C |
Ambient temperature |
Max. 60 °C |
Pore size in filter element |
5 μm (Size 1 / Size 3), 40 μm (Size 2 / Size 4) |
Sealant |
NBR |
Housing |
Die-cast zinc (G1/4 to G1/2), silver painted aluminium (G3/4 to G1), silver painted |
Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Description
Reversible diaphragm pressure regulators, independent of inlet pressure, with selfrelieving design, combined with a centrifugal separator.
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Thread | Flow rate (L/min) |
A (mm) |
C (mm) |
D (mm) |
DN | F (mm) |
---|---|---|---|---|---|---|---|
K- 07 25 06 68 | G 1/4 | 900 | 54,0 | 106,5 | 129,7 | 8 | 62,0 |
K- 07 25 06 71 | G 3/8 | 900 | 54,0 | 106,5 | 129,7 | 8 | 62,0 |
K- 07 25 06 74 | G 3/8 | 1500 | 70,0 | 120,5 | 145,9 | 11 | 76,5 |
K- 07 25 06 78 | G 1/2 | 3000 | 82,0 | 130,0 | 169,4 | 14 | 83,0 |
K- 07 25 06 81 | G 3/4 | 7000 | 125,0 | 190,6 | 261,4 | 25 | 145,0 |
K- 07 25 06 84 | G 1 | 7000 | 125,0 | 190,6 | 261,4 | 25 | 145,0 |
Spare parts
![](/images/up.gif)
- K-HALTERBAUSATZ STANDARD
- Holder
- K-SCHUTZKORB G
- Protective cage
- K-FILTERELEMENT
- Filter element
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-XV AGM MS NI
- Double nipples, parallel male thread, nickel-plated brass
- K-LOESBARE DOPPELNIPPEL MS
- Double nipples
- K-ABLASSVENTIL AUTO
- Fully-automatic drain valve with Adapter G 1/8
- K-AUTOMAT ABLASSVENTIL
- Automatic drain valve
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.