HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

K-SCHALTVENTILE 3/2 MULTIFIX MINI

On-off valves (3/2-way valves)
Hide product imageProduct image
K-SCHALTVENTILE 3/2 MULTIFIX MINI data/img/product/00042736_0.jpg - K-SCHALTVENTILE 3/2 MULTIFIX MINI
Hide propertiesProperties
Input pressure Min. 2 bar, max. 10 bar
Media temperature max. 60 °C
Ambient temperature Max. 60 °C
Electrical connection Device plug PG 9, type B, EN 175301-803
Protection IP IP 65 (P 54) acc. to DIN 40050
Flow rate 1600 l/min
cyclic duration relative 100 %
Vent port Silencer G 1/4
Sealant NBR
Housing Die-cast zinc
Flow rate measurement At P1 = 6 bar and pressure drop Δp = 1 bar
Hide descriptionDescription

Pneumatic systems or parts of systems can be switched on and off by means of anelectrical signal. When they are switched off, the system is relieved at the same time.

Hide informationNote

If several devices in the »multifix-mini« Series are assembled together, the maximum working pressure is 12 bar.
Further information on request

Hide product tableItem

Sort upwards

Sort downwards

Hide product spare partsSpare parts
K-KOPPELPAKET MEHR
Coupling packet
K-GERAETESTECKER
Coupling socket
K-AUTOMAT ABLASSVENTIL
Automatic drain valve
K-MAGNETSPULE MULTIFIX
Solenoid
K-SCHALLDAE SINTERBR SCHLITZ
Silencers, sintered bronze, slotted
Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.