Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-BEFUELLEINHEIT 230V AC HANSA
Filling units, electrically operated, with 230 VAC / 5= Hz solenoid, adjustable filling time
Product image
Properties
| Input pressure |
2 - 10 bar |
| Temp. range |
-10 °C to +50 °C |
| Media |
Compressed air |
| rush-in power alternating current 50Hz |
2,2 VA |
| Duty cycle |
ED 100 % |
| Electrical connection |
Connector type C, ISO 15217, 2 poles +PE |
| holding power alternating current 50Hz |
1,6 VA |
| Power consumption DC |
2,5 W |
| Protection IP |
IP 65 |
| Connection thread |
Material: Die-cast zinc |
| Housing |
Material: Grivory® (PA 66) |
| Flow rate measurement |
At P2 = 6 bar, pressure drop Δp = 1 bar |
Description
The filling unit protects devices connected downstream by ensuring a gradual build-up of pressure. The unit consists of a 3/2-way valve and a filling valve (start-up valve). It is connected and disconnected by means of the 3/2-way valve. The filling time can be altered by turning the adjusting screw.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Outlet | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
|---|---|---|---|---|---|---|---|
| K- 07 25 11 03 | G 1/4 | 1/4 | 1300 | 104,0 | 117.8 mm | 84,8 | 33,0 |
| K- 07 25 11 04 | G 3/8 | 1/4 | 1300 | 104,0 | 117.8 mm | 84,8 | 33,0 |
| K- 07 25 11 29 | G 3/8 | 1/2 | 3400 | 126,0 | 150.3 mm | 93,8 | 56,5 |
| K- 07 25 11 30 | G 1/2 | 1/2 | 3400 | 126,0 | 150.3 mm | 93,8 | 56,5 |
| K- 07 25 11 51 | G 3/4 | 1/2 | 8750 | 170,0 | 177.7 mm | 110,7 | 67,0 |
| K- 07 25 11 52 | G 1 | 1/2 | 8750 | 170,0 | 177.7 mm | 110,7 | 67,0 |
Ordering information
Filling units are also available with coil 110 V AC, 50 Hz and in a pneumatically operated version. Please ask for more information.
Accessories
- K-SCHALLDAE SINTERBR S
- Silencers, sintered bronze, slotted
- K-SCHALLDAE SINTERBR GE MS1
- Silencers, sintered bronze, with brass hexagon nut and brass thread
Spare parts
- K-HALTERBAUSATZ HANSA
- Holder HANSA
- K-VORSTEUERVENTIL HANSA
- Replacement solenoid HANSA
- K-GERAETESTECKER FORM C
- Connector
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.