K-NEBELOEL PC-BEHAEL SCHUTZK HANSA
Oil-mist lubricators
Product image


Properties
Input pressure |
0.5 - 16 bar |
Temp. range |
-10 °C to +50 °C |
Media |
Compressed air |
Sealant |
NBR |
Connection thread |
Material: Die-cast zinc |
Container |
Polycarbonate (with bayonet lock) |
Housing |
Material: Grivory® (PA 66) |
Protective cage |
Polyamide |
Dropper |
PA |
Oil grade |
CL 32 acc. to DIN 51517 - ISO VG 32 |
Flow rate measurement |
At P2 = 6 bar, pressure drop Δp = 1 bar |
Description
Oil-mist lubricators with excellent flow rates in modern design. These devices can be used to top up oil automatically. A hose must be connected to the threaded nipple on the oil bowl for this purpose. When the oil filling button on the top of the device is pressed, a Venturi nozzle opens and sucks oil into the bowl under vacuum.
Note
Further information on request
Item

Sort upwards
Sort downwards
![]() |
Thread | Flow rate (L/min) |
A (mm) |
B | C (mm) |
---|---|---|---|---|---|
K- 07 25 08 79 | G 1/4 | 2800 | 52,0 | 183.0 mm | 62,2 |
K- 07 25 08 80 | G 3/8 | 2800 | 52,0 | 183.0 mm | 62,2 |
K- 07 25 08 81 | G 3/8 | 8000 | 63,0 | 208.2 mm | 69,7 |
K- 07 25 08 82 | G 1/2 | 8000 | 63,0 | 208.2 mm | 69,7 |
K- 07 25 08 77 | G 3/4 | 16000 | 85,0 | 270.4 mm | 87,9 |
K- 07 25 08 78 | G 1 | 16000 | 85,0 | 270.4 mm | 87,9 |
Spare parts

- K-HALTERBAUSATZ HANSA
- Holder HANSA
- K-ERSATZBEHAELTER HANSA POLY
- Spare tank HANSA polycarbonat
- K-TROPFAUFSATZ HANSA
- Drip attachment HANSA
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.