K-PRAEZIONSFILTERREGLER
Precision filter regulators
Product image
![K-PRAEZIONSFILTERREGLER K-PRAEZIONSFILTERREGLER](/data/img/product/00004820_0.jpg)
![K-PRAEZIONSFILTERREGLER - data/img/product/00042585_0.jpg data/img/product/00042585_0.jpg - K-PRAEZIONSFILTERREGLER](/data/img/product/00042585_0.jpg)
Properties
Input pressure |
Max. 16 bar |
Media temperature |
max. 60 °C |
Ambient temperature |
Max. 60 °C |
Media |
Micro-filtered, unoiled compressed air (0.01 μm) |
Port for pressure gauge |
G 1/4 |
Pore size in filter element |
10 μm |
Sealant |
NBR |
Housing |
Die-cast zinc |
Internal air consumption |
0.01 l/min, depending on input pressure and control range |
Description
Diaphragm pressure regulators containing no non-ferrous metals, with selfrelieving design, combined with a centrifugal separator for applications requiring an extremely accurate working pressure.
Note
The given flow rates are based on the following parameters: 750 l/min: P1: 8 bar, P2: 2 bar, Δp ≤ 0.2 bar
750 l/min: P1: 8 bar, P2: 3 bar, Δp ≤ 0.5 bar
750 l/min: P1: 8 bar, P2: 5 bar, Δp ≤ 0.7 bar
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
---|---|---|---|---|---|---|---|
K- 07 25 09 86 | G 1/4 | 0.1 - 2 bar | 750 | 60,0 | 216.0 mm | 120,0 | 96,0 |
K- 07 25 09 87 | G 1/4 | 0.1 - 3 bar | 750 | 60,0 | 216.0 mm | 120,0 | 96,0 |
K- 07 25 09 88 | G 1/4 | 0.2 - 5 bar | 750 | 60,0 | 216.0 mm | 120,0 | 96,0 |
Additional information
Spare parts
![](/images/up.gif)
- K-HALTERBAUSATZ STANDARD
- Holder
- K-VERSCHLEI-SATZ
- Set of wearing parts
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.