Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-PRAEZI DRUCKREGLER MEM
Precision pressure regulators
Product image
Properties
| Input pressure |
Max. 16 bar |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 60 °C |
| Media |
Micro-filtered, unoiled compressed air (0.01 μm) |
| Port for pressure gauge |
G 1/4 |
| Sealant |
NBR |
| Housing |
Die-cast zinc |
| Internal air consumption |
0.01 l/min, depending on input pressure and control range |
Description
Diaphragm pressure regulators containing no non-ferrous metals, with self-relieving design for applications requiring an precise working pressure.
Note
The given flow rates are based on the following parameters: 750 l/min: P1: 8 bar, P2: 2 bar, Δp ≤ 0.2 bar
750 l/min: P1: 8 bar, P2: 3 bar, Δp ≤ 0.5 bar
750 l/min: P1: 8 bar, P2: 5 bar, Δp ≤ 0.7 bar
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
|---|---|---|---|---|---|---|---|
| K- 07 25 09 36 | G 1/4 | 0.1 - 2 bar | 750 | 60,0 | 152.0 mm | 120,0 | 32,0 |
| K- 07 25 09 37 | G 1/4 | 0.1 - 3 bar | 750 | 60,0 | 152.0 mm | 120,0 | 32,0 |
| K- 07 25 09 38 | G 1/4 | 0.2 - 5 bar | 750 | 60,0 | 152.0 mm | 120,0 | 32,0 |
Additional information
1500 l/min: P1: 10 bar, P2: 7 bar, Δp ≤ 0.1 bar.
Spare parts
- K-HALTERBAUSATZ STANDARD
- Holder
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-FILTERELEMENT
- Filter element
- K-XV AGM 2
- Double nipples, parallel male thread
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.