K-DRS
Pressure switchProduct image
Properties
Measured medium |
G 1/8 male and M 5 female |
Output signal |
2 x digital |
Design |
PNP |
Electrical connection |
Male connector M8, four pin |
Hysteresis |
Adjustable: 0 to 100% of set value or comparator mode |
Media |
Non-aggressive gases. dry, oil-free air |
Measured value display |
3-digit 7-segment LED |
Switching capacity |
180 mA |
Current consumption |
55 mA |
Temp. range |
0 - 50 °C |
Housing |
Polycarbonate |
status indicator |
2 x LED |
Description
Universal electronic pressure switch for safety monitoring, optimisation of cycle times and regulation circuits.
Its small size and low weight permit installation in handling systems directly at the point of use.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | G1 Malethread | G2 Femalethread | G3 Malethread | L (mm) |
L1 (mm) |
Measuring range | Voltage |
---|---|---|---|---|---|---|---|
K- 07 45 01 32 | G 1/8 | M 5 | M 8 x 1 | 58,5 | 75,5 | 0 - 10 bar | 10.8 - 30 V DC |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.