Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-DRUCKSCHALTER VAKUUM
Combined vacuum/pressure switch
Product image
Properties
| Design |
PNP |
| Measured medium |
G 1/8 male and M 5 female |
| Hysteresis |
Adjustable: 3 to 25% of set value |
| Temp. range |
0 - 50 °C |
| Media |
Non-aggressive gases. dry, oil-free air |
| Housing |
Polycarbonate |
| Output signal |
Analogue: 1 to 5 V |
| Electrical connection |
Male connector M8, four pin |
| Switching capacity |
125 mA |
| Current consumption |
30 mA |
| status indicator |
LED |
Description
Universal electronic vacuum and pressure switch for safety monitoring, optimisation of cycle times and regulation circuits. Its small size and low weight permit installation directly at the point of use.
Suitable for all special applications in the vacuum and compressed air sectors. Adjustable vacuum limit value and continuous vacuum monitoring.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
G1 Malethread | G2 Femalethread | G3 Malethread | L (mm) |
L1 (mm) |
Measuring range | Voltage |
|---|---|---|---|---|---|---|---|
| K- 07 45 01 31 | G 1/8 | M 5 | M 8 x 1 | 44,0 | 62,0 | -1 bis +10 bar | 10.8 - 30 V DC |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.