Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-VAKUUMSCHALTER
Vacuum switch
Product image
Properties
| Measured medium |
G 1/8 male and M 5 female |
| Output signal |
Analogue: 1 to 5 V |
| Electrical connection |
Male connector M8, four pin |
| Hysteresis |
Adjustable: 3 to 25% of set value |
| Media |
Non-aggressive gases. dry, oil-free air |
| Switching function |
PNP |
| Switching capacity |
125 mA |
| Current consumption |
30 mA |
| Temp. range |
0 - 50 °C |
| Housing |
Polycarbonate |
Description
Universal electronic vacuum switch for safety monitoring, optimisation of cycle times and regulation circuits. Its small size and low weight permit installation directly on the suction pad.
Switching point and hysteresis adjustable with a screw. Integrated LED for indication of the switching state.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
G1 Malethread | G2 Femalethread | G3 Malethread | L (mm) |
L1 (mm) |
Measuring range | Voltage |
|---|---|---|---|---|---|---|---|
| K- 07 45 01 58 | G 1/8 | M 5 | M 8 x 1 | 44,0 | 62,0 | -1 bis 0 bar | 10.8 - 30 V DC |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.