Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-BKR KOM
Ball valves (wafer type), with double-acting actuator
Product image
Properties
| Design |
Pneumatic actuators, in double- or single acting version, with integrated end-position feedback |
| Operating pressure |
DN 15 - DN 50: max. 40 bar; DN 65 - DN 100: max. 16 bar |
| Operating temperature |
-20 °C to +70 °C |
| Angle of rotation |
90 ° |
| Pilot pressure |
5.5 bar |
| Valve adapter |
Acc. to NAMUR |
| Drive |
aluminium eloxed |
| Drive seal |
NBR |
| Ball valve |
Stainless steel 1.4408, with ISO-flange plate |
| Ball valve seal |
PTFE |
Description
2-way ball valves compact flange type, full bore
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
DN | A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
|---|---|---|---|---|---|---|---|
| K- 07 30 02 76 | 15 | 116,0 | 125,0 | 40,0 | 95,0 | 45,0 | 61,5 |
| K- 07 30 02 77 | 20 | 116,0 | 129,3 | 44,0 | 105,0 | 58,0 | 61,5 |
| K- 07 30 02 78 | 25 | 133,0 | 138,6 | 53,0 | 115,0 | 68,0 | 68,5 |
| K- 07 30 02 79 | 32 | 137,0 | 158,2 | 58,4 | 135,0 | 78,0 | 80,0 |
| K- 07 30 02 80 | 40 | 161,0 | 176,3 | 62,0 | 145,0 | 88,0 | 92,5 |
| K- 07 30 02 81 | 50 | 161,0 | 185,5 | 78,0 | 155,0 | 102,0 | 92,5 |
| K- 07 30 02 82 | 65 | 180,0 | 205,0 | 100,0 | 185,0 | 122,0 | 92,5 |
| K- 07 30 02 83 | 80 | 209,0 | 240,0 | 120,0 | 200,0 | 138,0 | 110,5 |
| K- 07 30 02 75 | 100 | 221,0 | 272,0 | 152,0 | 220,0 | 158,0 | 120,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.