Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-BKR EI FED VA
Stainless steel ball valves, single-acting actuator, spring to close
Product image
Properties
| Design |
Pneumatic, double-piston, part-turn actuator, double-rocker principle |
| Operating pressure |
max. 160 bar (G 3/8, G 1/2); max. 100 bar (G 3/4, G 1); max. 60 bar (G 1 1/4, G 1 1/2); max. 40 bar (G 2) |
| Operating temperature |
-20 °C to +150 °C |
| Angle of rotation |
90 ° |
| Pilot pressure |
5.6 bar |
| Valve adapter |
Supplied as standard |
| Temp. range |
-20 °C to +80 °C |
| Drive |
aluminium eloxed |
| Drive seal |
NBR |
| Ball valve |
Stainless steel 1.4401/1.4301/1.4310/1.4408, with ISO-flange plate |
| Ball valve seal |
PTFE/FKM |
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
DN | Thread | A (mm) |
B (mm) |
L (mm) |
|---|---|---|---|---|---|
| K- 07 30 02 68 | 10 | Rp 3/8 | 221,0 | 142,0 | 51,0 |
| K- 07 30 02 69 | 15 | Rp 1/2 | 221,0 | 147,0 | 61,0 |
| K- 07 30 02 70 | 20 | Rp 3/4 | 240,0 | 163,0 | 70,0 |
| K- 07 30 02 71 | 25 | Rp 1 | 240,0 | 167,0 | 85,0 |
| K- 07 30 02 72 | 32 | Rp 1 1/4 | 294,0 | 183,0 | 95,0 |
| K- 07 30 02 73 | 40 | Rp 1 1/2 | 320,0 | 207,0 | 105,0 |
| K- 07 30 02 74 | 50 | Rp 2 | 357,0 | 234,0 | 125,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.