HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

K-3 BKR T DOPPELWIRKEND T1

Stainless steel ball valves, 3-way, with double-acting actuator, T-bore, normal position T1
Hide product imageProduct image
K-3 BKR T DOPPELWIRKEND T1 data/img/product/00042441_0.jpg - K-3 BKR T DOPPELWIRKEND T1
Hide propertiesProperties
Design Pneumatic actuators, in double- or single acting version, with integrated end-position feedback
Bore T shaped
Operating pressure max. 63 bar (depending on temperature and nominal size)
Operating temperature -20 °C to +70 °C
Angle of rotation 90 °
Standardised interfaces Interface actuator / valve: four or eight threaded holes in the drive housing according to EN ISO 5211, Interface actuator / S
Pilot pressure 5.5 bar
Valve adapter Acc. to NAMUR
Drive aluminium eloxed
Drive seal NBR
Ball valve Stainless steel 1.4401,with ISO-flange plate
Ball valve seal PTFE/FKM
Hide descriptionDescription

3-way cock, reduced bore

Hide informationNote

G thread acc. to DIN EN ISO 228-1, with ISO flange plate (acc. to ISO 5211)
Further information on request

Hide product tableItem

Sort upwards

Sort downwards

Hide additional informationAdditional information

Other T-positions on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.