K-DIGI DRUCKSCHA H 3 DURCHF PF2A
Digital Flow Switch high flow version PF2AProduct image
Properties
Design |
Digital Flow Switch |
Max. working pressure |
-50 kPa |
Rated voltage |
24 V DC |
operating display |
3 digits, 7-Segment-LED lights at output signal = ON: OUT1: green, OUT2: red) |
I/O cable |
without connection cable |
Protection IP |
IP 65 |
Media temperature |
0 °C to +50 °C |
Ambient temperature |
0 °C to +50 °C |
Media |
Air and nitrogen |
Series |
PF2A |
More information |
for air and nitrogen Three types of output: Switch, accumulated pulse and analog outputs Switching of current flow to accumulated flow is possible |
Description
Digital flow switch, series PF2A, for air and nitrogen, three output types: Switch, accumulated pulse and analogue outputs, switching from real-time flow rate to accumulated flow is possible, measuring range 1 to 10 l/min, media temperature 0 to 50 °C, operating temperature range 0 to 50 °C, repetition accuracy max. ±3% of the measuring range, temperature characteristic max. 5% of the measuring range. (0 to 50 °C, based on 25 °C), current consumption (no load) max. 170 mA, measuring principle thermistor (heating element), operating display 3-digit, 7-segment LED (illuminates at output signal ON OUT1: Green
OUT2: Red), operating pressure range –50 kPa... 0.5 MPa, switch output PNP open collector
internal voltage drop max. 1.5 V (at 80 mA working current)
2 outputs, supply voltage 12 to 24 VDC, protection class IP 65, connection size G 1/4
Item
Sort upwards
Sort downwards
Identification | Connecting thread | Measuring range | min. working pressure (MPa) |
Current consumption max. (mA) |
Repeatability |
---|---|---|---|---|---|
K- 07 50 00 34 | G 1/4 | 1 bis 10 l/min | 0,50 | 170 | max. ±3 % from scale |
K- 07 50 00 35 | G 3/8 | 10 bis 100 l/min | 0,50 | 170 | max. ±3 % from scale |
K- 07 50 00 39 | G 3/8 | 20 bis 200 l/min | 0,50 | 170 | max. ±3 % from scale |
K- 07 50 00 40 | G 1/4 | 5 bis 50 l/min | 0,50 | 170 | max. ±1 % from scale |
K- 07 50 00 41 | G 1/2 | 50 bis 500 l/min | 0,50 | 170 | max. ±3 % from scale |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.