Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-DRUCKVERST VBA
Booster Regulator, VBA
Product image
Properties
| min. working pressure |
0.20 MPa |
| Port for pneumatic pressure gauge |
Rc 1/8 |
| number connection pneumatic pressure gauge |
2 |
| max. inlet pressure |
0,1 to 1,0 MPa |
| Media temperature |
+2 °C to +50 °C |
| Ambient temperature |
+2 °C bis +50 °C |
| Media |
Compressed air |
| More information |
increases the pressure only where the force is insufficient due to low factory pressure (measure to save energy) no power supply required extended life: doubled compared to the conventional model improved reliability through built-in strainer on (IN terminal) Compressed air inlet reduced condensation: Venting channels directly integrated in the cylinder tube Reduced noise: 13 dB (A) |
Description
Booster regulator, series VBA, increases pressure only where the force is inadequate because of a low network pressure (energy saving measure), no electricity supply necessary, longer service life: doubled compared to conventional model, lower operating noise level: 13 dB (A), improved operational reliability from inbuilt mesh filter on (IN connection) compressed air inlet, reduced condensation levels: air exhaust channels integrated directly into the cylinder tube, suitable for: compressed air, size 1/4, with pressure gauge and silencer, elbow, pneumatic connection: G 1/4, pneumatic connection pressure gauge: G 1/8, pneumatic connections pressure gauge: 2, flow rate 230 l/min, pressure boost 1:2, manually actuated pressure adjustment mechanism, test pressure: 3 MPa, max. operating pressure: 2 MPa, min. operating pressure: 0.2 MPa, media temperature: +2 to +50 °C, ambient temperature: +2 to +50 °C
Item
Sort upwards
Sort downwards
 Identification |
Pneumatic Port | Size | pressure adjustment mechanism | pressure booster ratio | Flow rate (L/min) |
Max. working pressure (MPa) |
Test pressure (MPa) |
|---|---|---|---|---|---|---|---|
| K- 07 60 00 06 | G 1/4 | 1/4 | manually operated | 1:2 to 1:4 | 70 | 2,00 | 3,00 |
| K- 07 60 00 01 | G 1/4 | 1/4 | manually operated | 1:2 | 230 | 2,00 | 3,00 |
| K- 07 60 00 08 | G 3/8 | 3/8 | manually operated | 1:2 | 1000 | 1,00 | 1,50 |
| K- 07 60 00 12 | G 3/8 | 3/8 | pneumatically actuated | 1:2 | 1000 | 1,00 | 1,50 |
| K- 07 60 00 13 | G 1/2 | 1/2 | manually operated | 1:2 | 1900 | 1,00 | 1,50 |
| K- 07 60 00 14 | G 1/2 | 1/2 | pneumatically actuated | 1:2 | 1900 | 1,00 | 1,50 |
| K- 07 60 00 15 | G 1/2 | 1/2 | manually operated | 1:2 | 1600 | 1,60 | 2,40 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.