HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

K-DIGIT PRAEZ DRUCKSCHA ISE

Digital pressure switch ISE
Hide product imageProduct image
K-DIGIT PRAEZ DRUCKSCHA ISE
Hide propertiesProperties
Design Precision Digital Pressure Switch for excess pressure
Design with switching function display unit
max. output pressure 1,05 MPa
min. output pressure -105,00 kPa
max. nominal pressure 1,0 MPa
min. nominal pressure -100,0 kPa
Reacting time max. 2,5 ms
Rated voltage 12 to 24 VDC
Test pressure 1,50 MPa
Protection IP IP 65
Current consumption 80 mA
Approval CE, UL/CSA, RoHS
Media temperature -5 °C to +50 °C
Ambient temperature -5 °C bis +50 °C
Media Compressed air, non-corrosive gases, non-flammable gases
Series ISE40A
More information Compact, design
user-friendly operation
Copy function to copy settings on up to 10 sub-sensors
Energy saving function automatically switches off the display after 30 seconds
Anti-chattering function, selectable units, Adjustable hysteresis
Extended connection cable to 3.00 m
Pre-wired M12 connector with 4 pins (Lead wire length 100 mm)
Hide descriptionDescription

Digital precision pressure switch for overpressure, series ISE40A, 3 1/2-digit, 7-segment display, 2-colour (red/green), compact design, user-friendly operation, copy function, settings can be copied to up to 10 subordinate sensors, energy saving function,
the display switches off automatically after 30 seconds, anti-chattering function, free choice of units, adjustable hysteresis, 2 m connection cable with plug included

Hide product tableItem

Sort upwards

Sort downwards

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.