K-DIGI DRUCKSCHA H DURCHF IA PF2A
Digital Flow Switch PF2Ax795Product image
Properties
Design |
Digital Flow Switch |
Max. working pressure |
0,1 MPa |
min. working pressure |
1.50 MPa |
Rated voltage |
24 V DC |
Current consumption |
150 mA |
operating display |
3 digits, 7-Segment-LED lights at output signal = ON: OUT1: green, OUT2: red) |
I/O cable |
without connection cable |
Protection IP |
IP 65 |
Media temperature |
0 °C to +50 °C |
Ambient temperature |
0 °C to +50 °C |
Media |
Air and nitrogen |
Series |
PF2A |
More information |
for High flow Integrated Display Type |
Description
Digital flow switch for high flow, series PF2A, for dry air, with integrated display unit, measuring range 30 to 3000 l/min, smallest adjustment unit 5 l/min, media temperature 0 to 50 °C, operating temperature range 0 to 50 °C, repetition accuracy max. ±3% of the measuring range, temperature characteristic max. ±2% of the measuring range. (0 to 50 °C, based on 25 °C), current consumption max. 150 mA, measuring principle thermistor (heating element), operating display 3-digit, 7-segment LED (illuminates at output signal ON OUT1: Green
OUT2: Red), operating pressure range 0.1 to 1.5 MPa, switch output PNP open collector 1 output and 1 analogue output (4 to 20 mA), with function to switch over the display unit, supply voltage 24 VDC, protection class IP 65, connection cable not included,connection size G 1 1/2
Item
Sort upwards
Sort downwards
Identification | Connecting thread | adjustment unit [min] (L/min) |
Measuring range | Repeatability |
---|---|---|---|---|
K- 07 50 00 30 | G 1 | 5,00 | 30 bis 3000 l/min | max. ±3 % from scale |
K- 07 50 00 33 | G 1 1/2 | 10,00 | 60 bis 6000 l/min | max. ±3 % from scale |
K- 07 50 00 38 | G 2 | 10,00 | 120 bis 12000 l/min | max. ±3 % from scale |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.