HF 100 (1SN)
Hot water hose
Product image
![HF 100 (1SN) HF 100 (1SN)](/data/img/product/HF_100.jpg)
Properties
Application |
High pressure cleaning equipment |
Standard |
EN 853 1 SN |
Inner layer |
water, oil and heat resistant synthetic rubber |
Insert |
one high tensile steel wire braided insert |
Outer layer |
environmentally safe synthetic rubber |
Colour |
blue |
Temp. min. |
-10 °C |
Temp. max. |
150 °C |
Elongation |
+ 2 % to - 4 % |
Media |
Water Mineral oil (up to + 100°C) Water-oil emulsions |
Note
The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
DN* | Inches | Size | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
---|---|---|---|---|---|---|---|---|
HF 106 | 6 | 1/4" | 4 | 6,4 | 14,1 | 250,0 | 900 | 100 |
HF 108 | 8 | 5/16" | 5 | 8,0 | 15,7 | 220,0 | 850 | 115 |
HF 110 | 10 | 3/8" | 6 | 9,5 | 18,1 | 220,0 | 720 | 130 |
HF 113 | 12 | 1/2" | 8 | 12,7 | 21,4 | 220,0 | 640 | 180 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.