Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK 054 322
Counterbalancing valve SC, single-acting
Product image
Properties
| Design |
single-acting Pilot controlled Seat version - leak-free |
| Material |
Housing: Aluminium Inside parts of steel |
| Operating pressure |
max. 350 bar |
Note
Max. load pressure 250 bar
Item
Sort upwards
Sort downwards
 Identification |
Thread | Pressure setting range bar | Q max. (L/min) |
Level control ratio | A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
H (mm) |
I (mm) |
Design | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HK 054 322 100 220 | G 3/8” | 60 - 210 | 40 | 1:3.55 | 160 | 30 | 60 | 20 | 40 | 65 | 12 | 100 | - | 0,75 |
| HK 054 322 100 235 | G 3/8” | 120 - 350 | 40 | 1:3.55 | 160 | 30 | 60 | 20 | 40 | 65 | 12 | 100 | - | 0,75 |
| HK 054 322 100 320 | G 1/2” | 60 - 210 | 70 | 1:3.55 | 185 | 35 | 80 | 26 | 41 | 71 | 18 | 107 | with measurement connector | 1,20 |
| HK 054 322 100 335 | G 1/2” | 120 - 350 | 70 | 1:3.55 | 185 | 35 | 80 | 26 | 41 | 71 | 18 | 107 | with measurement connector | 1,29 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.