Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK FPMD
Pressure relief valve FPMD (shock valve)
Product image
Properties
| Design |
direct-controlled double-acting |
| Operating pressure |
max. 250 bar with aluminium housing / max. 350 bar with steel housing |
Note
These valves must be set according to the application.
Item
Sort upwards
Sort downwards
 Identification |
Pressure setting range bar | Pressure max. (bar) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
Thread V1 + V3 | Volumetric flow max. (L/min) |
Material | Ø F (mm) |
G (mm) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HK FPMD 40 ILP 38 A20 | 50 - 220 | 250 | 78 | 80 | 35 | 32 | 57 | G 3/8” | 50,0 | Aluminium | 9 | 30 | 0,6 |
| HK FPMD 40 ILP 38 S35 | 80 - 350 | 350 | 78 | 80 | 35 | 32 | 57 | G 3/8” | 40,0 | Steel | 9 | 30 | 0,8 |
| HK FPMD 70 ILP 12 A20 | 80 - 250 | 250 | 92 | 100 | 40 | 34 | 57 | G 1/2” | 80,0 | Aluminium | 9 | 38 | 1,0 |
| HK FPMD 70 ILP 12 S35 | 100 - 350 | 350 | 92 | 100 | 40 | 34 | 57 | G 1/2” | 80,0 | Steel | 9 | 38 | 1,3 |
Material applies to the housing
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.